Keto-Mojo Photoacoustic Breathalyzer Error Codes & How to Resolve Them

  • Last updated November 18, 2026

Find your error below to understand what it means and how to resolve it. Select an error to view step-by-step troubleshooting instructions.

Battery Empty

Not enough power to take a measurement.

How to resolve it

  1. Charge the Breathalyzer using a USB-C charging cord.
  2. Allow the device to charge sufficiently before attempting another measurement.
  3. Once charged, restart the measurement.
  4. If the battery error continues after charging, contact Keto-Mojo Support.

Breath Error

Too little or too much breath for a valid sample.

How to resolve it

  1. The Breathalyzer will reset after 5-10 seconds.
  2. Wait for the Breathalyzer to indicate it is ready to take a measurement.
  3. Exhale into the device until you feel it vibrate.
  4. If the error persists, contact Keto-Mojo Support.

Measurement Error

An unexpected device error occurred. Error details are recorded to help improve future performance.

How to resolve it

  1. The Breathalyzer will reset after 5-10 seconds.
  2. Wait for the Breathalyzer to indicate it is ready to take a measurement.
  3. Exhale naturally in one steady breath into the device until you feel it vibrate.
  4. If the error persists, contact Keto-Mojo Support.

Note: The Breathalyzer will share error information with Keto-Mojo to help improve future performance.

Moisture Detected

Excess moisture inside the Photoacoustic Breathalyzer prevented the measurement.

How to resolve it

  1. Close the Breathalyzer slider to turn it off.
  2. Open the Breathalyzer slider halfway.
  3. Allow to air dry for 30 minutes.
  4. If the error continues, contact Keto-Mojo Support.

Note: Do not insert objects into the breathalyzer or attempt to dry internal components using direct heat.

Too Much Vibration

Movement or vibration interrupted the measurement.

How to resolve it

  1. Move to a stable and quiet location away from excessive movement or vibration.
  2. Keep the Breathalyzer steady during the measurement.
  3. Avoid shaking, moving, or repositioning the device while processing.
  4. If the error continues, contact Keto-Mojo Support.

Note: Do not attempt to take a measurement in a moving vehicle.

Still need help? If your error continues after troubleshooting, contact our support team at support@keto-mojo.com.