Ölçüm cihazı kutunuzu veya şerit kutunuzu yanlışlıkla attınız mı veya kaybettiniz mi?
Sorun değil, biz sizi örtüyoruz!
Bir GK + ölçüm kiti satın aldıysanız, içinde glikoz ve keton şeritleri bulacaksınız. Şerit sargısının arkasında bir LOT numarası bulacaksınız. Bu sayı, ölçüm cihazı kiti kutunuzun altında yazılı Kontrol Solüsyonu aralıklarına karşılık gelir. Benzer şekilde, bir kutu glikoz şeridi, keton şeridi veya Birleşik Şerit Paketi satın aldıysanız, kontrol aralıklarınız bu kutu üzerinde basılıdır.
Ölçüm cihazı kiti kutunuza veya şerit kutunuza artık erişiminiz yoksa, ÇOK Aşağıdaki formda şeritlerinizin sayısı ve kontrol aralıklarınızın ne olduğunu size söyleyeceğiz. glikoz lot numarası farklı olacak keton lot numarasıve her ikisi için de kontrol aralığını alacaksınız Seviye 2 ve 3. seviye çözümler (kontrol çözümleri ölçüm aletinizle birlikte verilmiştir veya ayrıca satın alınabilir).
Bu aralıkları not edin ve ölçüm cihazı seti aksesuar çantanızda saklayın. Bununla birlikte, her yeni şerit satın aldığınızda, kontrol aralıklarınızın değişebileceğini unutmayın. Yeni şerit kutularını referans için sakladığınızdan emin olun.
Roughly a third of the time I test I get error messages requiring me to use a new test strip. Error e3 or e4. This is an unacceptable frequency of errors since the test strips cost about 50 cents each. Sometimes it takes as many as 3 strips before I get an acceptable reading. What can be done to reduce the errors or reduce the cost of the strips?
Do you deliver to Canada
So.what is the range?
I tried to find my solution number but it says invalid. UAN20089 for glucose, UEN20077 for Keto.
I had to order additional KM test strips. My meter appears to be way off. I am trying to use the control solution, yet the Lot number on my test strips is coming up as invalid. This is incredibly frustrating as the device is useless to me as long as the readings are off and I cannot determine by how much. I need to speak with someone about this.
Trying to find range for my level 2 ketone test solution. The ketone lot: U210293 but tool says not valid number.
my blood sugar is high for no apparent reason and i’m concerned that my meter is not reading correctly. i typed in U210277 above and get an ‘Enter a valid Lot Number.’ message and these don’t expire until 9/23. i don’t have my org box or solution. where do i go from here? i didn’t see a video addressing this issue but maybe i missed it. i would appreciate a quick response. thanks.
it says invalid lot number on both u210286 and u210291 exp 2023-09-18 on both
I’m using the strips that came with the Meter Kit and need the test ranges. Blood glucose strip = U210259; Ketone strip = U210260. Error message for each comes up in red as “Enter a valid Lot Number”.
Says my lot numbers are invalid on both strips, but I put in what the package said, 3 times
I am typing in the lot number exactly as it is on the foil pack but it’s coming up invalid. A waste of another strip and frankly, too many are getting wasted due to this things inconsistency. My old keto mojo one was far better to use
Lot number does not work with this tool. there is no letter on the wrapper just a six digit number
I am entering the lot number on the back of my strip U210259. I keep getting an error message saying “enter a valid lot number”. The expiration date on the strips is 08/17/2023 so they should still be valid.
Months later and multiple different packs of test strips, your website still says every single lot nimber doesn’t exist. Please update your website so I can use the damn product. Many of us are having the same issue. Gonna return on amazon shortly.
When trying to look up the test reference range, I enter the lot numbers exactly as they appear on the strip wrapper and get an invalid lot number message. I tried several times.
Entered lot number and it says to enter a valid lot number….well it is the lot number on test strip pkg. A joke !!@ I am trying to use control solution because reading on mojo glucose is 30% different than my other glucose meters
The lot on the back of the strip is not recognized
I get “Enter a valid Lot Number” each time and I know I typed it in correctly.
my lot numbers are indicating invalid?
my lot numbers are: glucose U210086
Said lot numbers are invalid
It says my lot number (U210259) is invalid
I put in the lot numbers but was told it was invalid. I’m looking right at the number on the strip package just like the picture shows.
lot # doesn’t work in website here
My monitor is testing I correctly. I have used the glucose solution and it came back 109. I have lot #u210205 per the back of the strip. When I input this into the search, it isn’t coming back.
Please let me know how to accurately test my system and if the testing is currently reading correctly for this lot
The lot number i entering came back as “invalid”
I put my Lot #s in and it says not valid. 😑 I double checked that I put in the glucose and ketone correctly in the right boxes
Glucose test strip lot# U210137 and Ketone test strip lot# U210138 entered. Enter a valid Lot Number comes up. Fortunately I found the control solutions ranges on the bottom of the box on a sticker.
Glikoz Şeridi Lot Numarasını Girin
Enter a valid Lot Number
Keton Strip Lot Numarasını Girin
Geçerli bir Lot Numarası girin.
Beginning to think i got scammed. My lot number is called invalid
both my glucose & my ketone control numbers are 2
I entered the lot number correctly U210176 & U210177 and it said that it was an invalid number
Typed the lot numbers U210286 and U210291 and it said “Enter a valid lot number” – I entered what I have. Unless.
I entered the LOT number: U210038 and it said it wasn’t a valid LOT number???
I am having problems with monitor and what I believe inaccuracy and want to test to ensure its working properly! Could someone please get in touch to help me out?
IT TOLD ME BOTH OF MY LOT NUMBERS WERE INVALID
I am taking the number off my package and it say invalid! 😢
Lot numbers on back of my straps do not come up as valid lots.
Unable to view control ranges of straps. Control results don’t appear in sync.
My lot number says it’s invalid but I’ve triple checked that the number on the test strip packet is correct.
so i typed in the lot number from the box, and the back of the test strips, and got an “invalid lot number” message
how can I find the control range ?
i put in the lot numbers and it is coming up invalid
I tested my keto mojo as when I test myself ketos keep coming up Lo not saying that is wrong
but when I tested w the solution I was informed my reading may be high
Please advise as to what I should do next lot # ketone strips U210089
glucose strips U210086
I am looking to order more lancets and both strips but very hesitant if I am going to have to get another meter
God Bless and
Thank You so Much
Received an error that my lot number was invalid, “Enter a valid Lot Number”. Just received my unit and wanted to perform a control test. There is no control ranges on the packets.
I think my machine is off based on the numbers I’ve been receiving. I used brand new testing solution and at level 2 the numbers are 42 points higher than stated in the package insert and with level 3 they are 55 points lower than stated. I’m not sure how to proceed from here. Please let me know if this is fixable
Your system did not find my lot number U210277
It said invalid lot number for both and I entered them correctly.
It says “enter valid lot #. I did that.
I enter the lot number of my glucose test strips and it says invalid lot number. I did it multiple times and it still does not work. I need to know what the range is for the glucose control solution for level two. The lot number is U210259
My ketone strip lot number is U210293. But your silly website is indicating it is an invalid lot number. I’ve checked it 5 times now. So your website is simply pissing me off.
It’s telling me my lot # is invalid
I keep having a response on this page of “Enter a Valid Lot Number”. Glucose: U210284 Ketone: UEN20059
Lot number invalid
When I entered my lot number to see what the control numbers are it said it was invalid, Please let me know how to verify if my machine is calibrated. Thank you
The lot number on my test strips came in as a “invalid number” (U210288)
…not sure what to do from here.
The lot numbers didn’t work
I’m still very confused about how to calibrate my meter using these control solutions. I got some new strips and they seem inaccurate compared to the strips I had before. These regularly show my ketones as too low and my glucose too high, by around 15 points. I thought I remembered that we could calibrate these. I’ll keep looking to see if I can find the original instructions that came with the GK+ meter.
I bought the kit with solutions and both strips in the kits there Lots keeps reading not valid. U210177… i’m trying to figure out if my meter is calibrated and don’t know the ranges???
I enter the lot number exactly as it is shown and I get a message saying “enter a valid lot number”. It IS a valid lot number! My ketone strip lot number is U210212
My lot numbers are from the keto mojo kit and it’s saying enter a valid lot number. These are valid lot numbers.
Update lot range U210222 not displaying
Trying to do a control solution test. The lot number on the strip, U210038 comes up as invalid. When I do the control solution test, the meter simply reads “LO” I do not know what this means. I would guess it’s reading high, but am not sure how to test and/or calibrate it…
Glucose lot number U210176
Ketone lot number U210177
I need the control ranges and the form above says my lot numbers are invalid.
I typed in the lot number for glucose (U210288) and then for ketone strip (U210295) and it responded with “Enter Valid Lot Number” for each
It says my lot number is not right…but it is on the package.
You have a place to enter lot #s to look up control solution ranges: but you don’t provide the actual control solution ranges after we enter the lot numbers! There’s no enter button and hitting enter in either of the lot # edit fields does submit the information for a response either. PLEASE FIX THIS BUG!!!
None of my lot numbers work
My meter will not sync with the app. Please advise
1. I put in the lot numbers but the control range did not come up!
Here are my lot numbers:
I need the control range for level 2
2. How do I delete the test score from the device as it will alter my true averages?
The lost number on my test strip can up invalid but I entered the correct lot number numerous times. Additionally, the instructions in the kit indicated the test range values would be on the test strip or box and they are not.
Hi, I was trying to check if my meter is ok on the glucose end.
I entered my lot number of U220035 and you said invalid.
I ran a test from solution and it showed 122, but what does that mean? My solution is level 2?
How in heck do you gave a control solution with such a wide range of 88 to 132 mg/dL? This apparently does not give a reading of what a within normal limits glucose is when non-keto?
My lot number doesn’t give any result. It’s 210418, without a letter in front of it. I tried it with all letters of the alphabet by the way, but nothing works.
I’m getting an error that my lot numbers are invalid. U210044 and U210045, both expire in 2023
I could not find my control solution ranges for glucose.
I used 220035 for glucose strips and was not found.
Then I tried the lot number on the control solution UAN20104 and got the same response
I’m entering my lot number and it is saying invalid
U210286 exp 2023-09-18
I just purchased
I put my lot numbers on the site and it says nvalid. This is what is on the strip packages and purchase box!!
Says invalid lot number but its literally what is on the strips
I enter my lot number exactly and it states invalid number. Trying to find out what the control range is.
The lot numbers come back as “invalid” but they are definitely correct
I entered the lot number for the test strips to find the control solution ranges. It tells me I have entered an invalid lot number. It seems the system does not have information for newer test strips.
I enter the lote number on the trips and “Enter a valid Lot Number” message appear, I check it like 5 time to make sure the lot is correct,,, also I enter the lot with and without the “U”
Look up doesn’t work. My lot number comes back invalid. U210213
To find the range for the Control Solution if the box is missing, please offer a search database for the Lot Number on the bottle of the Control Solution itself.
Can’t use control lots. Care full entry of Ketone Lot U210006 = invalid. The control solutions; all four LEAKED in shipping. This is the second batch I’ve bought. NO instructions. Over all poor quality control. Difficult to use strips, hard to open, etc. Please e-mail back firstname.lastname@example.org
I have read all your directions and I can’t figure out what the number should be for the control solution it says it should be in number two what does that mean? The numbers won’t import I don’t understand can you just show us a chart or something.
Please cut it out with the screen take over ads as well. Nobody likes them.
There is no range listed!!!!!
Regarding the FAQ on how to look up the calibration number on “https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/” . After entering a valid lot number on the testing strip package as instructed I received the “Enter a Valid Lot Number” error message. My lot numbers are: glucose strip – U210286 and ketone strip – U210293.
My lot numbers are coming up invalid
The lot numbers I am entering are not valid:
Ketone: U210140 and Glucose: U210137
I entered the lot numbers for both multiple times and screen kept listing list a valid number. My Glucose and Keytone lots are U210211 and U210212
Hi – I entered my glucose and ketone lot numbers but nothing happened. It didn’t give me the range for the solutions.
Lot number on back of strips packaging was not found
When I enter my glucose strip lot number above, I get a message saying to enter a valid lot number.
Typed in both lot numbers for ketone and glucose. Both are “not valid.” These came with my new meter. Also, numerous ketone strips are missing. The package was sealed with no strip within, 5 missing in total.
Lot not found U210260
I put in the lot number for both the glucose strip and the ketone strip and they both said to enter in a valid Lot number, which I did. So, it was no help!
I need level 2 control range numbers
There was no answer because it says my lot #’s are invalid. I double checked and they were typed in correctly.
My strips numbers were not in your system
I’m entering the lot number from the back of the glucose test strip package and it just keeps saying “enter a valid lot number.” I’ve double checked it and I’m entering the correct lot number. I just want to know the control test range.
The app said my lot numbers were not valid.
I entered the lot number from the back of the ketone test strip wrapper. I get “enter a valid lot number” message.
displays invalid lot number
Says my lot number not valid. But, that’s what is printed on wrapper. Hmmmm.
The following Lot number do not appear within the lookup to determine the test solutions range:
Could you provide me with the ranges for both? Thank you!
It’s says my lot numbers are invalid
Lot number didn’t work U210043 and my control solution doesn’t have a range
It is saying my lot# is not vail that came with the box. Glucose lot # is U210137 and Ketone lot # is U210138
I am trying to figure out the control range. I went to the website and it is pretty straight forward however when I put in lot code for both glucose and ketones it tells me invalided lot number. Lots numbers are below.
Glucose Lot: U210215
Ketones Lot: U210177
My keto mojo machine is giving me varied blood sugar results with each strip. It looks to be inaccurate. Which makes me wonder if my ketone strips are accurate too?
I was trying to look up my ketone and glucose testing solution ranges to see if my meter is working correctly, but they said I have an invalid lot #?
I’m very confused and dissatisfied because this machine wasn’t cheap!
Please let me know what I can do.
Thank you in advance,
Lot# U21022 ketone strips shows as an invalid lot #
I could not find the range for the test strips. The lot number is U210176 for glucose and U210178 for ketone. Thanks!
It’s saying that both my lot numbers are incorrect
My mojo is not working properly …says my control number is in valid …I just bought my mojo + a few months ago from you
I typed in the number and it said it was invalid. U210370.
I have the older meter and would like to just purchase strips and the new meter. I don’t want to pay for things I don’t need. Can I purchase strips and meter? Or do you have old strips left? Thank you
I entered my lot number exactly as it shows on the strip – U210038 – and it keeps saying invalid lot number.
I can’t find the control range for L2 vial by using the lot number on my new ketone strips. They say U210004 but your search says invalid. I threw away the box so I don’t have the grey sticker.
My blood sugars seem crazy out of control and I’m trying to use the control solutions but can’t find the sheet of ranges. Tried to use the page and it Jerrod telling me that my lot numbers on the strips aren’t valid
My lot numbers are not “valid” for either of these entries. I have triple-checked by typing.
I entered the lot # and it indicates invalid. Glucose U210086 Keto U210089
I need the control values for glucose strips from the lot # U210176. The form above is saying it is not valid.
It says my lot numbers are invalid.
LOT NUMBER COMES BACK INVALID HOW DO I KNOW MY TEST SOLUTION RANGE?
I have glu strip lot number U210010 exo 3/26/23. I’m trying to confirm control range. System says number not valid.
It didn’t tell me the range when I put in the lot numbers
I put the lot number in, and it kicked it out saying enter valid lot number.
Error “Enter a valid lot number”. Glucose lot number on my strip
Error “Enter a valid lot number”. Glucose lot number on my strip is U210130
Same error for ketone strips. Ketone lot number on my strip is U210129
My lot numbers come up as invalid
Said invalid lot number
SAYS MY LOT NUMBER IS NOT VALID… BUT IT MOST CERTAINLY IS WHAT IS ON THE STRIPS…
GLUCOSE U210043 KETONE U210046
A typed in the ketone lot number: 210082, but it is not accepted and I cant see the control solution range.
It does not accept the lot number.
Lot number for glucose is 210079
The reading I got for glucose test is 5.7.
The lot numbers I have for both glucose and ketone strips are not long enough for your form.
Error message says “Enter a valid Lot Number.” I am entering the correct number
The above “control solution ranges” Lot number check is not acknowledging that the four separate lot numbers received in the latest bundle are even valid!
Lot number U210176 give “Enter a valid Lot Number.”
I have entered my lot number on the glucose strips and it keeps saying enter a valid number….I have!!!
Both Lot numbers have been typed in correctly and both say the lot number is invalid. How can I get my ranges when this is saying the lot numbers are invalid when they’re not??
It is telling me to enter a valid lot number when I’m precisely entered the correct lot number
I put the correct lot numbers below. Response was they were invalid.
Can you help me with this?
My glucose strips indicate a lot number of U210033, and I get invalid lot number message when I enter.
update your lot number faster–we’ve had this for months and your site says invalid lot. we triple checked we’re entering it correctly
I tested my blood glucose this morning and got a reading of 173 and ketones of 2.3. I immediately retested and got a reading of 86 and a reading of hi for ketones. I then ran controls and got 106 for the glucose strip and 2.4 for ketone strip. Ketone strip lot #u210134 and glucose lot# u210132
Last month I bought a new Keto-Mojo GK+ meter kit to replace my old meter.
I am trying to learn more about the process, but when I enter the lot numbers on the strip packages I just get the message “Enter a valid lot number”, what’s wrong? The glucose lot number is U210176 exp: 2023-06-08,
the ketone lot number is U210177 exp:2023-06-08.
Said lot number not valid
What is the damn concentration reading for the damn std?
In this wide control test sample range how can you accurately convert to blood sample test.
My ketone and glucose strips lot number is not showing up says invalid. Exp date is 4/16/23
Says enter a valid lit number. I did
I am incredibly angry with the fact that you FORCED me to buy a new meter and it doesn’t sync correctly. I followed your directions exactly. But my lot number shows up as not being valid. The strips came with the meter for goodness sake.
I want this fixed and I really hope you can help me.
I recently bought glucose strips. The lot number comes up invalid.
im typing in the lot number, U210176, and it just says error. also i srill have all the papers that were in the box and cant find these ranges
I am trying to find the test control level 2 numbers for my G+ device. The two test strip lot numbers I have are Glucose U210176 and Ketone U210177. Please tell me the range my meter should return for these test solutions level 2 Glucose UAN20085 and level 2 Ketone UEN20072.
the lot numbers on the strips give me the message “Enter a valid lot number” and the number entered from the back of the strip case is correct.
When I enter the the lot number out of the package in the above area it says non valid lot number
Can’t figure out control test range for strips that came with kit. Ketone strip lot number U210177. When i enter says enter value lot number
This is not recognizing my lot numbers.
I am receiving an “invalid lot number” message when trying to find control range. The lot number is U210045
Why is the range so big? If the range of error for my actual blood sugar is that wide, then that is concerning.
I have inputted 2 boxes lotnumbersand thy have all come up as invalid.
Bu benim için hiçbir soruyu cevaplamıyor. Ayrıca parti numaralarını girdiğimde de çalışmıyor. Geçersiz olmadıklarından eminim ama site bana geçerli bir lot numarası girmemi söylemeye devam ediyor. Glikoz şeridim için U210012 ve keton şeridim için U200222'ye giriyorum ve hiçbir şey yok. Ayrıca asıl sorum, glikoz çözeltisi için UAN20050 lot numaralı kontrol çözeltisiyle ve keton çözeltisi için UEN20036 ile hangi okumaları almam gerektiğiyle ilgiliydi. Lütfen sitenin düzgün çalışması için yardım edin ve düzeltin.
Keton ölçüm cihazım kontrol solüsyonu aralığının altında okuyor ve bu bana bunun ne anlama geldiği veya nasıl kalibre edileceği veya ünitemin doğru bir şekilde okuduğundan emin olmak için herhangi bir şey yapılacağı hakkında herhangi bir bilgi vermiyor.
1.8-2.8, kontrol için yazdırılan aralıktır
Chrome tarayıcısında kontur okumasının ne olması gerektiğini göremiyor. Keton şeridi geçersiz lot numarası olarak gösteriliyor
Sayfa çalışmıyor – korucuyu göstermiyor!
Parti numaraları geçersiz çıktı
Şeritlerim için parti numaralarını tanımıyor.
Bu benim lot numaralarımı kabul etmeyecek. Geçerli bir Lot numarası girmemi istiyor
Şeritlerin sayısını tanımıyor
kontrol çözümlerini test etmek için birçok şerit kullandı.
Kontrol çözümlerinin gösterdiği şey:
Boşuna birçok şerit denedim.
FWIW, 4 günlük bir oruçtayım. Bu metre başına sonuçlar burada
Yardım! arızalı bir sayacım var mı?
Kitimle birlikte gelen kontrol çözümlerim için aralığın ne olması gerektiğini bulmaya çalışıyorum. Parti numarasını girdiğimde bulunamadı olarak çıkıyor.
Şerit numarasını girdiğimde geçersiz olduğunu söylüyor, U210010.
Strip paketinin arkasında yazılı keton strips lot numaram U200181'dir, ancak sisteminiz bunu tanımıyor ve kırmızı renkte "geçerli bir lot numarası girin" yazıyor. Uygun keton şeridi paketinde basılı olanı doğru girdiğimi dört kez kontrol ettim ancak sisteminiz bunu tanımıyor. keton testi okumam 2.5 çıktı, sayacım çalışıyor mu? glikoz lot numaram U200169 ve test okuması 113 idi. Lütfen neyin yanlış olduğunu ve ölçüm cihazımın doğru çalışıp çalışmadığını bana bildirin.
Keto-mojomu kalibre etmek için kontrol solüsyonu numaralarını bulamıyorum. Glikoz ve keton striplerimden lot numaralarını girdiğimde siteniz geçersiz lot numaraları olduğunu söylüyor.
Kutuyu attığım için parti numaramı yazıyorum ve kontrol çözümünü kullanmaya çalışıyorum ve geçerli parti numarası girin diyor. U200180 keton şeritleri. Okumalarım 5 saniyede 2.4'ten .4'e .2'ye çıkıyor. Bu noktada satın aldığım tüm şeritleri boşa harcıyorum ve kısa süre önce GK+ monitörünü aldım çünkü temelde bizi buna zorladın. Senden aldığım orijinal monitöre kıyasla çöp.
Kontrol aralıkları geniştir. Bana göre, Keto-Mojo ölçümlerinin yanlış olduğu anlamına geliyor. Doğru bir sayaç, standartlaştırılmış kontrol çözümlerini kullanarak daha az değişken bir okuma göstermemeli mi? Teşekkürler.
keto mojo'mla birlikte gelen test şeritlerinin ambalajı veya şeritleri üzerinde herhangi bir aralık yok, bu yüzden kontrol solüsyonu test sonuçlarının bu aralıkta olup olmadığı hakkında hiçbir fikrim yok.
Keton test şeritleri için parti numarası geçersiz olarak gösteriliyor (U200180).
lot numarası geçerli değil diyor. doğru girildi. U200179 keton şeritleri
İPhone'da / keton sonuçlarında 2. ve 3. düzey sonuçlar kesilir ve tamamen görünmez
Avrupa'da seyahat ederken glikoz şeritleri aldım ve test sonucu vermiyorlar.
1. Sayıların ne anlama geldiğini bilmiyorum.
2. Rakamların alt kısımları kesildi.
Numara, test şeridinden doğru şekilde girilmiş.
Net değil. Ölçüm cihazım kontrol çözümümü kullandığımı fark ediyor ve okuma 105 gösteriyor ancak kutudaki aralık 96-136 çok büyük. Bu bana sayacımın doğru okuyup okumadığını söylemiyor. Bugün kontrol ediyordum çünkü kan şekerim 50'lerde anormal derecede düşük ve ketonlarım 1,9'da anormal derecede yüksek.
Keton lot numarasını girdim ancak bu araç geçersiz olduğunu söylüyor. Üç kez kontrol ettim ve doğru girildi