Jogou fora ou perdeu por engano a caixa do kit do medidor ou a caixa de tiras?
Sem problemas, estamos protegendo você!
Se você comprou um kit de medidor GK +, encontrará tiras de glicose e cetonas dentro dele. Na parte de trás da embalagem da tira, você encontrará um número LOT. Esse número corresponde às faixas de solução de controle impressas na parte inferior da caixa do kit do medidor. Da mesma forma, se você comprou uma caixa de tiras de glicose, tiras de cetona ou o Pacote de combinação de tiras, seus intervalos de controle estão impressos nessa caixa.
Se você não tiver mais acesso à caixa do kit do medidor ou caixa de tiras, você pode inserir o MUITO número de tiras no formulário abaixo e nós lhe diremos quais são seus intervalos de controle. O número de lote de glicose será diferente do número de lote cetona, e você terá a faixa de controle para ambos Nível 2 e Nível 3 soluções (soluções de controle foram fornecidas com o kit do medidor ou podem ser adquiridas separadamente).
Anote esses intervalos e mantenha-os no estojo de acessórios do kit do medidor. Lembre-se, entretanto, de que cada vez que você compra novas tiras, seus intervalos de controle podem mudar. Certifique-se de guardar todas as novas caixas de tiras para referência.
Roughly a third of the time I test I get error messages requiring me to use a new test strip. Error e3 or e4. This is an unacceptable frequency of errors since the test strips cost about 50 cents each. Sometimes it takes as many as 3 strips before I get an acceptable reading. What can be done to reduce the errors or reduce the cost of the strips?
Do you deliver to Canada
So.what is the range?
I tried to find my solution number but it says invalid. UAN20089 for glucose, UEN20077 for Keto.
I had to order additional KM test strips. My meter appears to be way off. I am trying to use the control solution, yet the Lot number on my test strips is coming up as invalid. This is incredibly frustrating as the device is useless to me as long as the readings are off and I cannot determine by how much. I need to speak with someone about this.
Trying to find range for my level 2 ketone test solution. The ketone lot: U210293 but tool says not valid number.
my blood sugar is high for no apparent reason and i’m concerned that my meter is not reading correctly. i typed in U210277 above and get an ‘Enter a valid Lot Number.’ message and these don’t expire until 9/23. i don’t have my org box or solution. where do i go from here? i didn’t see a video addressing this issue but maybe i missed it. i would appreciate a quick response. thanks.
it says invalid lot number on both u210286 and u210291 exp 2023-09-18 on both
I’m using the strips that came with the Meter Kit and need the test ranges. Blood glucose strip = U210259; Ketone strip = U210260. Error message for each comes up in red as “Enter a valid Lot Number”.
Says my lot numbers are invalid on both strips, but I put in what the package said, 3 times
I am typing in the lot number exactly as it is on the foil pack but it’s coming up invalid. A waste of another strip and frankly, too many are getting wasted due to this things inconsistency. My old keto mojo one was far better to use
Lot number does not work with this tool. there is no letter on the wrapper just a six digit number
I am entering the lot number on the back of my strip U210259. I keep getting an error message saying “enter a valid lot number”. The expiration date on the strips is 08/17/2023 so they should still be valid.
Months later and multiple different packs of test strips, your website still says every single lot nimber doesn’t exist. Please update your website so I can use the damn product. Many of us are having the same issue. Gonna return on amazon shortly.
When trying to look up the test reference range, I enter the lot numbers exactly as they appear on the strip wrapper and get an invalid lot number message. I tried several times.
Entered lot number and it says to enter a valid lot number….well it is the lot number on test strip pkg. A joke !!@ I am trying to use control solution because reading on mojo glucose is 30% different than my other glucose meters
The lot on the back of the strip is not recognized
I get “Enter a valid Lot Number” each time and I know I typed it in correctly.
my lot numbers are indicating invalid?
my lot numbers are: glucose U210086
ketone U210089
what’s up!
Said lot numbers are invalid
It says my lot number (U210259) is invalid
I put in the lot numbers but was told it was invalid. I’m looking right at the number on the strip package just like the picture shows.
lot # doesn’t work in website here
https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/
U210177
U210176
My monitor is testing I correctly. I have used the glucose solution and it came back 109. I have lot #u210205 per the back of the strip. When I input this into the search, it isn’t coming back.
Please let me know how to accurately test my system and if the testing is currently reading correctly for this lot
The lot number i entering came back as “invalid”
I put my Lot #s in and it says not valid. 😑 I double checked that I put in the glucose and ketone correctly in the right boxes
Glucose test strip lot# U210137 and Ketone test strip lot# U210138 entered. Enter a valid Lot Number comes up. Fortunately I found the control solutions ranges on the bottom of the box on a sticker.
Digite o número do lote da tira de glicose
U210137
Enter a valid Lot Number
Digite o número do lote da tira cetônica
U210138
Insira um número de lote válido.
Beginning to think i got scammed. My lot number is called invalid
both my glucose & my ketone control numbers are 2
I entered the lot number correctly U210176 & U210177 and it said that it was an invalid number
Typed the lot numbers U210286 and U210291 and it said “Enter a valid lot number” – I entered what I have. Unless.
Olá
I entered the LOT number: U210038 and it said it wasn’t a valid LOT number???
I am having problems with monitor and what I believe inaccuracy and want to test to ensure its working properly! Could someone please get in touch to help me out?
IT TOLD ME BOTH OF MY LOT NUMBERS WERE INVALID
I am taking the number off my package and it say invalid! 😢
Lot numbers on back of my straps do not come up as valid lots.
Unable to view control ranges of straps. Control results don’t appear in sync.
My lot number says it’s invalid but I’ve triple checked that the number on the test strip packet is correct.
so i typed in the lot number from the box, and the back of the test strips, and got an “invalid lot number” message
u210127
how can I find the control range ?
i put in the lot numbers and it is coming up invalid
I tested my keto mojo as when I test myself ketos keep coming up Lo not saying that is wrong
but when I tested w the solution I was informed my reading may be high
Please advise as to what I should do next lot # ketone strips U210089
glucose strips U210086
I am looking to order more lancets and both strips but very hesitant if I am going to have to get another meter
God Bless and
Thank You so Much
Denise Decker
Received an error that my lot number was invalid, “Enter a valid Lot Number”. Just received my unit and wanted to perform a control test. There is no control ranges on the packets.
I think my machine is off based on the numbers I’ve been receiving. I used brand new testing solution and at level 2 the numbers are 42 points higher than stated in the package insert and with level 3 they are 55 points lower than stated. I’m not sure how to proceed from here. Please let me know if this is fixable
Your system did not find my lot number U210277
It said invalid lot number for both and I entered them correctly.
It says “enter valid lot #. I did that.
I enter the lot number of my glucose test strips and it says invalid lot number. I did it multiple times and it still does not work. I need to know what the range is for the glucose control solution for level two. The lot number is U210259
My ketone strip lot number is U210293. But your silly website is indicating it is an invalid lot number. I’ve checked it 5 times now. So your website is simply pissing me off.
It’s telling me my lot # is invalid
I keep having a response on this page of “Enter a Valid Lot Number”. Glucose: U210284 Ketone: UEN20059
Lot number invalid
When I entered my lot number to see what the control numbers are it said it was invalid, Please let me know how to verify if my machine is calibrated. Thank you
The lot number on my test strips came in as a “invalid number” (U210288)
…not sure what to do from here.
The lot numbers didn’t work
I’m still very confused about how to calibrate my meter using these control solutions. I got some new strips and they seem inaccurate compared to the strips I had before. These regularly show my ketones as too low and my glucose too high, by around 15 points. I thought I remembered that we could calibrate these. I’ll keep looking to see if I can find the original instructions that came with the GK+ meter.
I bought the kit with solutions and both strips in the kits there Lots keeps reading not valid. U210177… i’m trying to figure out if my meter is calibrated and don’t know the ranges???
I enter the lot number exactly as it is shown and I get a message saying “enter a valid lot number”. It IS a valid lot number! My ketone strip lot number is U210212
My lot numbers are from the keto mojo kit and it’s saying enter a valid lot number. These are valid lot numbers.
Update lot range U210222 not displaying
Trying to do a control solution test. The lot number on the strip, U210038 comes up as invalid. When I do the control solution test, the meter simply reads “LO” I do not know what this means. I would guess it’s reading high, but am not sure how to test and/or calibrate it…
Glucose lot number U210176
Ketone lot number U210177
I need the control ranges and the form above says my lot numbers are invalid.
Obrigada
I typed in the lot number for glucose (U210288) and then for ketone strip (U210295) and it responded with “Enter Valid Lot Number” for each
It says my lot number is not right…but it is on the package.
You have a place to enter lot #s to look up control solution ranges: but you don’t provide the actual control solution ranges after we enter the lot numbers! There’s no enter button and hitting enter in either of the lot # edit fields does submit the information for a response either. PLEASE FIX THIS BUG!!!
None of my lot numbers work
U210242
U210211. G
U210259. G
U210210. K
My meter will not sync with the app. Please advise
1. I put in the lot numbers but the control range did not come up!
Here are my lot numbers:
Glucose: 210418
Ketone: 210419
I need the control range for level 2
2. How do I delete the test score from the device as it will alter my true averages?
The lost number on my test strip can up invalid but I entered the correct lot number numerous times. Additionally, the instructions in the kit indicated the test range values would be on the test strip or box and they are not.
Hi, I was trying to check if my meter is ok on the glucose end.
I entered my lot number of U220035 and you said invalid.
I ran a test from solution and it showed 122, but what does that mean? My solution is level 2?
How in heck do you gave a control solution with such a wide range of 88 to 132 mg/dL? This apparently does not give a reading of what a within normal limits glucose is when non-keto?
My lot number doesn’t give any result. It’s 210418, without a letter in front of it. I tried it with all letters of the alphabet by the way, but nothing works.
I’m getting an error that my lot numbers are invalid. U210044 and U210045, both expire in 2023
I could not find my control solution ranges for glucose.
I used 220035 for glucose strips and was not found.
Then I tried the lot number on the control solution UAN20104 and got the same response
I’m entering my lot number and it is saying invalid
U210286 exp 2023-09-18
I just purchased
I put my lot numbers on the site and it says nvalid. This is what is on the strip packages and purchase box!!
Says invalid lot number but its literally what is on the strips
I enter my lot number exactly and it states invalid number. Trying to find out what the control range is.
The lot numbers come back as “invalid” but they are definitely correct
I entered the lot number for the test strips to find the control solution ranges. It tells me I have entered an invalid lot number. It seems the system does not have information for newer test strips.
I enter the lote number on the trips and “Enter a valid Lot Number” message appear, I check it like 5 time to make sure the lot is correct,,, also I enter the lot with and without the “U”
Look up doesn’t work. My lot number comes back invalid. U210213
To find the range for the Control Solution if the box is missing, please offer a search database for the Lot Number on the bottle of the Control Solution itself.
Can’t use control lots. Care full entry of Ketone Lot U210006 = invalid. The control solutions; all four LEAKED in shipping. This is the second batch I’ve bought. NO instructions. Over all poor quality control. Difficult to use strips, hard to open, etc. Please e-mail back xbill@mac.com
I have read all your directions and I can’t figure out what the number should be for the control solution it says it should be in number two what does that mean? The numbers won’t import I don’t understand can you just show us a chart or something.
Please cut it out with the screen take over ads as well. Nobody likes them.
There is no range listed!!!!!
Regarding the FAQ on how to look up the calibration number on “https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/” . After entering a valid lot number on the testing strip package as instructed I received the “Enter a Valid Lot Number” error message. My lot numbers are: glucose strip – U210286 and ketone strip – U210293.
My lot numbers are coming up invalid
The lot numbers I am entering are not valid:
Ketone: U210140 and Glucose: U210137
I entered the lot numbers for both multiple times and screen kept listing list a valid number. My Glucose and Keytone lots are U210211 and U210212
Hi – I entered my glucose and ketone lot numbers but nothing happened. It didn’t give me the range for the solutions.
Lot number on back of strips packaging was not found
When I enter my glucose strip lot number above, I get a message saying to enter a valid lot number.
Typed in both lot numbers for ketone and glucose. Both are “not valid.” These came with my new meter. Also, numerous ketone strips are missing. The package was sealed with no strip within, 5 missing in total.
Lot not found U210260
I put in the lot number for both the glucose strip and the ketone strip and they both said to enter in a valid Lot number, which I did. So, it was no help!
I need level 2 control range numbers
There was no answer because it says my lot #’s are invalid. I double checked and they were typed in correctly.
My strips numbers were not in your system
I’m entering the lot number from the back of the glucose test strip package and it just keeps saying “enter a valid lot number.” I’ve double checked it and I’m entering the correct lot number. I just want to know the control test range.
The app said my lot numbers were not valid.
I entered the lot number from the back of the ketone test strip wrapper. I get “enter a valid lot number” message.
displays invalid lot number
Says my lot number not valid. But, that’s what is printed on wrapper. Hmmmm.
Hello,
The following Lot number do not appear within the lookup to determine the test solutions range:
Ketone: Lot#U210337
Glucouse: Lot#U210338
Could you provide me with the ranges for both? Thank you!
It’s says my lot numbers are invalid
Lot number didn’t work U210043 and my control solution doesn’t have a range
It is saying my lot# is not vail that came with the box. Glucose lot # is U210137 and Ketone lot # is U210138
I am trying to figure out the control range. I went to the website and it is pretty straight forward however when I put in lot code for both glucose and ketones it tells me invalided lot number. Lots numbers are below.
Glucose Lot: U210215
Ketones Lot: U210177
Hi there,
My keto mojo machine is giving me varied blood sugar results with each strip. It looks to be inaccurate. Which makes me wonder if my ketone strips are accurate too?
I was trying to look up my ketone and glucose testing solution ranges to see if my meter is working correctly, but they said I have an invalid lot #?
I’m very confused and dissatisfied because this machine wasn’t cheap!
Please let me know what I can do.
Thank you in advance,
Kelly
Lot# U21022 ketone strips shows as an invalid lot #
Oi,
I could not find the range for the test strips. The lot number is U210176 for glucose and U210178 for ketone. Thanks!
It’s saying that both my lot numbers are incorrect
My mojo is not working properly …says my control number is in valid …I just bought my mojo + a few months ago from you
Socorro
I typed in the number and it said it was invalid. U210370.
Olá
I have the older meter and would like to just purchase strips and the new meter. I don’t want to pay for things I don’t need. Can I purchase strips and meter? Or do you have old strips left? Thank you
I entered my lot number exactly as it shows on the strip – U210038 – and it keeps saying invalid lot number.
I can’t find the control range for L2 vial by using the lot number on my new ketone strips. They say U210004 but your search says invalid. I threw away the box so I don’t have the grey sticker.
My blood sugars seem crazy out of control and I’m trying to use the control solutions but can’t find the sheet of ranges. Tried to use the page and it Jerrod telling me that my lot numbers on the strips aren’t valid
My lot numbers are not “valid” for either of these entries. I have triple-checked by typing.
Glucose: U210284
Ketone: U210287
I entered the lot # and it indicates invalid. Glucose U210086 Keto U210089
Oi,
I need the control values for glucose strips from the lot # U210176. The form above is saying it is not valid.
It says my lot numbers are invalid.
LOT NUMBER COMES BACK INVALID HOW DO I KNOW MY TEST SOLUTION RANGE?
I have glu strip lot number U210010 exo 3/26/23. I’m trying to confirm control range. System says number not valid.
It didn’t tell me the range when I put in the lot numbers
I put the lot number in, and it kicked it out saying enter valid lot number.
Error “Enter a valid lot number”. Glucose lot number on my strip
Error “Enter a valid lot number”. Glucose lot number on my strip is U210130
Same error for ketone strips. Ketone lot number on my strip is U210129
My lot numbers come up as invalid
Said invalid lot number
SAYS MY LOT NUMBER IS NOT VALID… BUT IT MOST CERTAINLY IS WHAT IS ON THE STRIPS…
GLUCOSE U210043 KETONE U210046
A typed in the ketone lot number: 210082, but it is not accepted and I cant see the control solution range.
It does not accept the lot number.
Lot number for glucose is 210079
The reading I got for glucose test is 5.7.
The lot numbers I have for both glucose and ketone strips are not long enough for your form.
Error message says “Enter a valid Lot Number.” I am entering the correct number
The above “control solution ranges” Lot number check is not acknowledging that the four separate lot numbers received in the latest bundle are even valid!
Lot number U210176 give “Enter a valid Lot Number.”
I have entered my lot number on the glucose strips and it keeps saying enter a valid number….I have!!!
Both Lot numbers have been typed in correctly and both say the lot number is invalid. How can I get my ranges when this is saying the lot numbers are invalid when they’re not??
It is telling me to enter a valid lot number when I’m precisely entered the correct lot number
I put the correct lot numbers below. Response was they were invalid.
Glucose lot:U210137
Ketones lot:U210138
Can you help me with this?
Obrigada
My glucose strips indicate a lot number of U210033, and I get invalid lot number message when I enter.
atualize seu número de lote mais rápido - temos isso há meses e seu site diz lote inválido. verificamos três vezes se estamos inserindo corretamente
Eu testei minha glicose no sangue esta manhã e obtive uma leitura de 173 e cetonas de 2,3. Eu imediatamente retestei e obtive uma leitura de 86 e uma leitura de oi para cetonas. Em seguida, executei controles e obtive 106 para a tira de glicose e 2,4 para a tira de cetona. Tiras de cetona lote #u210134 e glicose lote# u210132
No mês passado comprei um novo kit de medidor Keto-Mojo GK + para substituir meu medidor antigo.
Estou tentando aprender mais sobre o processo, mas quando insiro os números dos lotes nas embalagens de tira, recebo apenas a mensagem “Insira um número de lote válido”, o que há de errado? O número do lote de glicose é U210176 exp: 2023-06-08,
o número do lote da cetona é U210177 exp: 2023-06-08.
O referido número de lote não é válido
Glicose U210176
Qual é a maldita leitura de concentração para o maldito padrão?
Nesta ampla faixa de amostra de teste de controle, como você pode converter com precisão para teste de amostra de sangue.
Meu número de lote de tiras de cetona e glicose não está aparecendo, diz inválido. A data de validade é 16/04/23
Diz digite um número aceso válido. Eu fiz
Estou extremamente bravo com o fato de você me FORÇAR a comprar um novo medidor e ele não sincronizar corretamente. Eu segui exatamente suas instruções. Mas meu número de lote aparece como inválido. As tiras vieram com o medidor, pelo amor de Deus.
Quero isso consertado e realmente espero que você possa me ajudar.
Recentemente, comprei tiras de glicose. O número do lote é inválido.
U210043
estou digitando o número do lote, U210176, e apenas informa o erro. também terei todos os papéis que estavam na caixa e não consigo encontrar esses intervalos
Estou tentando encontrar os números de nível 2 de controle de teste para meu dispositivo G +. Os dois números de lote da tira de teste que tenho são Glucose U210176 e Ketone U210177. Diga-me a faixa que meu medidor deve retornar para essas soluções de teste de nível 2 de glicose UAN20085 e de nível 2 de cetona UEN20072.
os números de lote nas tiras exibem a mensagem “Digite um número de lote válido” e o número inserido na parte de trás da caixa das tiras está correto.
Quando eu insiro o número do lote fora da embalagem na área acima, aparece o número do lote inválido
Não consigo descobrir o intervalo de teste de controle para as tiras que vieram com o kit. Número de lote da tira de cetona U210177. Quando eu entro diz insira o valor do número do lote
Isso não é reconhecer meus números de lote.
Estou recebendo uma mensagem de “número de lote inválido” ao tentar encontrar a faixa de controle. O número do lote é U210045
Por que o intervalo é tão grande? Se a faixa de erro para meu açúcar no sangue real for tão ampla, isso é preocupante.
Inseri 2 caixas e números de lote e todos foram considerados inválidos.
Isso não responde a nenhuma pergunta para mim. Além disso, quando eu insiro os números de lote, eles não funcionam. Tenho certeza de que eles não são inválidos, mas o site continua a me dizer para inserir um número de lote válido. Eu insiro U210012 para minha tira de glicose e U200222 minha tira de cetona e nada. Além disso, minha verdadeira dúvida era sobre quais leituras eu deveria obter com a solução de controle com os números de lote UAN20050 para a solução de glicose e UEN20036 para a solução de cetona. Por favor, ajude e conserte o site para funcionar corretamente.
Meu medidor de cetona está lendo abaixo da faixa da solução de controle e isso não me dá nenhuma informação sobre o que isso significa ou como calibrar ou fazer qualquer coisa para ter certeza de que minha unidade está lendo com precisão
1.7 estava lendo
1,8-2,8 é o intervalo impresso para o controle
No navegador Chrome, não consigo ver qual deve ser a leitura do contorno. A tira de cetona está mostrando um número de lote inválido
A página não funciona - não mostra o ranger!
Os números de lote apareceram como inválidos
Ele não reconhece os números de lote das minhas tiras.
Isso não aceitará meus números de lote. Continua me pedindo para inserir um número de lote válido
Não reconhece o número das tiras
usou muitas tiras para testar as soluções de controle.
Aqui está o que as soluções de controle mostraram:
Cetonas .2
Glucose Lo
Tentei muitas tiras sem sucesso.
FWIW, estou em jejum de 4 dias. Por este medidor, aqui estão os resultados
Cetonas 7.1
Glicose 45
Ajuda! eu tenho um medidor com defeito?
Earl Hersh
Houston, Texas
281-460-5968
Estou tentando saber qual deve ser o intervalo das minhas soluções de controle que acompanham meu kit. Se eu inserir o número do lote, ele aparecerá como não encontrado.
Quando coloco o número da tira, diz que é inválido, U210010.
Meu número de lote de tiras de cetona impresso no verso da embalagem de tiras é U200181, no entanto, seu sistema não está reconhecendo e em vermelho indica “digite um número de lote válido”. Verifiquei quádruplamente se estou inserindo o que está impresso na embalagem correta da tira de cetona corretamente, mas seu sistema não o reconhece. a leitura do meu teste de cetona foi 2,5, meu medidor está funcionando? meu número de lote de glicose é U200169 e a leitura do teste foi 113. informe-me o que está errado e se meu medidor está funcionando corretamente.
Não consigo encontrar os números da solução de controle para calibrar meu ceto-mojo. Quando eu insiro os números de lote de minhas tiras de glicose e cetona, seu site diz que são números de lote inválidos
Estou digitando meu número de lote porque joguei fora a caixa e estou tentando usar a solução de controle e está dizendo insira um número de lote válido. Tiras de cetona U200180. Minhas leituras vão de 2,4 a 0,2 a 0,2 em 5 segundos. Estou apenas desperdiçando todas as tiras que comprei neste momento e acabei de receber o monitor GK + há pouco tempo porque você basicamente nos obrigou a isso. É um lixo em comparação com o monitor original que comprei de você.
As faixas de controle são amplas. Para mim, isso se traduz em medições Keto-Mojo imprecisas. Um medidor preciso não deveria demonstrar uma leitura menos variável usando soluções de controle padronizadas? Obrigado.
as tiras de teste que vieram com meu keto mojo não têm uma faixa de variação na embalagem ou nas tiras, então não tenho ideia se os resultados do teste da solução de controle estão nessa faixa.
O número do lote para tiras de teste de cetonas é mostrado como inválido (U200180).
o número do lote está dizendo que não é válido. foi digitado corretamente. Tiras de cetona U200179
No iPhone / cetona, os resultados para o nível 2 e nível 3 são cortados e não estão completamente visíveis
Peguei minhas tiras de glicose enquanto viajava pela Europa e elas não fornecem o resultado do teste.
1. Não sei o que significam os números.
2. O fundo dos números foi cortado.
Não reconheceu o número, digitado corretamente na tira-teste.
Não está claro. Meu medidor reconhece que usei minha solução de controle e a leitura mostra 105, mas o intervalo na caixa é muito grande de 96 a 136. Isso não está me dizendo se meu medidor está lendo com precisão. Eu estava verificando hoje porque minha glicose no sangue está anormalmente baixa na década de 50 e minhas cetonas estão anormalmente altas em 1,9
Digitei o número do lote Ketone, mas esta ferramenta diz que é inválido. Eu verifiquei três vezes e foi inserido corretamente