Czy przez pomyłkę wyrzuciłeś lub zgubiłeś pudełko z licznikiem lub pudełko na paski?
Nie ma problemu, jesteśmy z Tobą!
Jeśli kupiłeś zestaw glukometru GK +, w środku znajdziesz paski glukozy i ketonów. Z tyłu opakowania paska znajduje się numer LOT. Ta liczba odpowiada zakresom roztworu kontrolnego wydrukowanym na spodzie pudełka z zestawem glukometru. Podobnie, jeśli kupiłeś pudełko pasków glukozy, pasków ketonowych lub Combo Pack pasków, zakresy kontroli są wydrukowane na tym pudełku.
Jeśli nie masz już dostępu do pudełka z zestawem glukometru lub pudełka na paski, możesz wprowadzić LOS liczbę pasków w poniższym formularzu, a my powiemy Ci, jakie są Twoje zakresy kontrolne. Plik numer serii glukozy będzie się różnić od numer partii ketonów, a otrzymasz zakres kontroli dla obu Poziom 2 i Poziom 3 roztwory kontrolne (roztwory kontrolne zostały dostarczone wraz z glukometrem lub można je zakupić oddzielnie).
Zapisz te zakresy i przechowuj je w etui z akcesoriami zestawu glukometru. Pamiętaj jednak, że za każdym razem, gdy kupujesz nowe paski, zakresy kontroli mogą się zmieniać. Zachowaj wszystkie nowe pudełka na paski w celach informacyjnych.
Roughly a third of the time I test I get error messages requiring me to use a new test strip. Error e3 or e4. This is an unacceptable frequency of errors since the test strips cost about 50 cents each. Sometimes it takes as many as 3 strips before I get an acceptable reading. What can be done to reduce the errors or reduce the cost of the strips?
Do you deliver to Canada
So.what is the range?
I tried to find my solution number but it says invalid. UAN20089 for glucose, UEN20077 for Keto.
I had to order additional KM test strips. My meter appears to be way off. I am trying to use the control solution, yet the Lot number on my test strips is coming up as invalid. This is incredibly frustrating as the device is useless to me as long as the readings are off and I cannot determine by how much. I need to speak with someone about this.
Trying to find range for my level 2 ketone test solution. The ketone lot: U210293 but tool says not valid number.
my blood sugar is high for no apparent reason and i’m concerned that my meter is not reading correctly. i typed in U210277 above and get an ‘Enter a valid Lot Number.’ message and these don’t expire until 9/23. i don’t have my org box or solution. where do i go from here? i didn’t see a video addressing this issue but maybe i missed it. i would appreciate a quick response. thanks.
it says invalid lot number on both u210286 and u210291 exp 2023-09-18 on both
I’m using the strips that came with the Meter Kit and need the test ranges. Blood glucose strip = U210259; Ketone strip = U210260. Error message for each comes up in red as “Enter a valid Lot Number”.
Says my lot numbers are invalid on both strips, but I put in what the package said, 3 times
I am typing in the lot number exactly as it is on the foil pack but it’s coming up invalid. A waste of another strip and frankly, too many are getting wasted due to this things inconsistency. My old keto mojo one was far better to use
Lot number does not work with this tool. there is no letter on the wrapper just a six digit number
I am entering the lot number on the back of my strip U210259. I keep getting an error message saying “enter a valid lot number”. The expiration date on the strips is 08/17/2023 so they should still be valid.
Months later and multiple different packs of test strips, your website still says every single lot nimber doesn’t exist. Please update your website so I can use the damn product. Many of us are having the same issue. Gonna return on amazon shortly.
When trying to look up the test reference range, I enter the lot numbers exactly as they appear on the strip wrapper and get an invalid lot number message. I tried several times.
Entered lot number and it says to enter a valid lot number….well it is the lot number on test strip pkg. A joke !!@ I am trying to use control solution because reading on mojo glucose is 30% different than my other glucose meters
The lot on the back of the strip is not recognized
I get “Enter a valid Lot Number” each time and I know I typed it in correctly.
my lot numbers are indicating invalid?
my lot numbers are: glucose U210086
ketone U210089
what’s up!
Said lot numbers are invalid
It says my lot number (U210259) is invalid
I put in the lot numbers but was told it was invalid. I’m looking right at the number on the strip package just like the picture shows.
lot # doesn’t work in website here
https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/
U210177
U210176
My monitor is testing I correctly. I have used the glucose solution and it came back 109. I have lot #u210205 per the back of the strip. When I input this into the search, it isn’t coming back.
Please let me know how to accurately test my system and if the testing is currently reading correctly for this lot
The lot number i entering came back as “invalid”
I put my Lot #s in and it says not valid. 😑 I double checked that I put in the glucose and ketone correctly in the right boxes
Glucose test strip lot# U210137 and Ketone test strip lot# U210138 entered. Enter a valid Lot Number comes up. Fortunately I found the control solutions ranges on the bottom of the box on a sticker.
Wprowadź numer partii paska glukozy
U210137
Enter a valid Lot Number
Wprowadź numer partii taśmy ketonowej
U210138
Wprowadź prawidłowy numer partii.
Beginning to think i got scammed. My lot number is called invalid
both my glucose & my ketone control numbers are 2
I entered the lot number correctly U210176 & U210177 and it said that it was an invalid number
Typed the lot numbers U210286 and U210291 and it said “Enter a valid lot number” – I entered what I have. Unless.
cześć
I entered the LOT number: U210038 and it said it wasn’t a valid LOT number???
I am having problems with monitor and what I believe inaccuracy and want to test to ensure its working properly! Could someone please get in touch to help me out?
IT TOLD ME BOTH OF MY LOT NUMBERS WERE INVALID
I am taking the number off my package and it say invalid! 😢
Lot numbers on back of my straps do not come up as valid lots.
Unable to view control ranges of straps. Control results don’t appear in sync.
My lot number says it’s invalid but I’ve triple checked that the number on the test strip packet is correct.
so i typed in the lot number from the box, and the back of the test strips, and got an “invalid lot number” message
u210127
how can I find the control range ?
i put in the lot numbers and it is coming up invalid
I tested my keto mojo as when I test myself ketos keep coming up Lo not saying that is wrong
but when I tested w the solution I was informed my reading may be high
Please advise as to what I should do next lot # ketone strips U210089
glucose strips U210086
I am looking to order more lancets and both strips but very hesitant if I am going to have to get another meter
God Bless and
Thank You so Much
Denise Decker
Received an error that my lot number was invalid, “Enter a valid Lot Number”. Just received my unit and wanted to perform a control test. There is no control ranges on the packets.
I think my machine is off based on the numbers I’ve been receiving. I used brand new testing solution and at level 2 the numbers are 42 points higher than stated in the package insert and with level 3 they are 55 points lower than stated. I’m not sure how to proceed from here. Please let me know if this is fixable
Your system did not find my lot number U210277
It said invalid lot number for both and I entered them correctly.
It says “enter valid lot #. I did that.
I enter the lot number of my glucose test strips and it says invalid lot number. I did it multiple times and it still does not work. I need to know what the range is for the glucose control solution for level two. The lot number is U210259
My ketone strip lot number is U210293. But your silly website is indicating it is an invalid lot number. I’ve checked it 5 times now. So your website is simply pissing me off.
It’s telling me my lot # is invalid
I keep having a response on this page of “Enter a Valid Lot Number”. Glucose: U210284 Ketone: UEN20059
Lot number invalid
When I entered my lot number to see what the control numbers are it said it was invalid, Please let me know how to verify if my machine is calibrated. Thank you
The lot number on my test strips came in as a “invalid number” (U210288)
…not sure what to do from here.
The lot numbers didn’t work
I’m still very confused about how to calibrate my meter using these control solutions. I got some new strips and they seem inaccurate compared to the strips I had before. These regularly show my ketones as too low and my glucose too high, by around 15 points. I thought I remembered that we could calibrate these. I’ll keep looking to see if I can find the original instructions that came with the GK+ meter.
I bought the kit with solutions and both strips in the kits there Lots keeps reading not valid. U210177… i’m trying to figure out if my meter is calibrated and don’t know the ranges???
I enter the lot number exactly as it is shown and I get a message saying “enter a valid lot number”. It IS a valid lot number! My ketone strip lot number is U210212
My lot numbers are from the keto mojo kit and it’s saying enter a valid lot number. These are valid lot numbers.
Update lot range U210222 not displaying
Trying to do a control solution test. The lot number on the strip, U210038 comes up as invalid. When I do the control solution test, the meter simply reads “LO” I do not know what this means. I would guess it’s reading high, but am not sure how to test and/or calibrate it…
Glucose lot number U210176
Ketone lot number U210177
I need the control ranges and the form above says my lot numbers are invalid.
Dziękuję Ci
I typed in the lot number for glucose (U210288) and then for ketone strip (U210295) and it responded with “Enter Valid Lot Number” for each
It says my lot number is not right…but it is on the package.
You have a place to enter lot #s to look up control solution ranges: but you don’t provide the actual control solution ranges after we enter the lot numbers! There’s no enter button and hitting enter in either of the lot # edit fields does submit the information for a response either. PLEASE FIX THIS BUG!!!
None of my lot numbers work
U210242
U210211. G
U210259. G
U210210. K
My meter will not sync with the app. Please advise
1. I put in the lot numbers but the control range did not come up!
Here are my lot numbers:
Glucose: 210418
Ketone: 210419
I need the control range for level 2
2. How do I delete the test score from the device as it will alter my true averages?
The lost number on my test strip can up invalid but I entered the correct lot number numerous times. Additionally, the instructions in the kit indicated the test range values would be on the test strip or box and they are not.
Hi, I was trying to check if my meter is ok on the glucose end.
I entered my lot number of U220035 and you said invalid.
I ran a test from solution and it showed 122, but what does that mean? My solution is level 2?
How in heck do you gave a control solution with such a wide range of 88 to 132 mg/dL? This apparently does not give a reading of what a within normal limits glucose is when non-keto?
My lot number doesn’t give any result. It’s 210418, without a letter in front of it. I tried it with all letters of the alphabet by the way, but nothing works.
I’m getting an error that my lot numbers are invalid. U210044 and U210045, both expire in 2023
I could not find my control solution ranges for glucose.
I used 220035 for glucose strips and was not found.
Then I tried the lot number on the control solution UAN20104 and got the same response
I’m entering my lot number and it is saying invalid
U210286 exp 2023-09-18
I just purchased
I put my lot numbers on the site and it says nvalid. This is what is on the strip packages and purchase box!!
Says invalid lot number but its literally what is on the strips
I enter my lot number exactly and it states invalid number. Trying to find out what the control range is.
The lot numbers come back as “invalid” but they are definitely correct
I entered the lot number for the test strips to find the control solution ranges. It tells me I have entered an invalid lot number. It seems the system does not have information for newer test strips.
I enter the lote number on the trips and “Enter a valid Lot Number” message appear, I check it like 5 time to make sure the lot is correct,,, also I enter the lot with and without the “U”
Look up doesn’t work. My lot number comes back invalid. U210213
To find the range for the Control Solution if the box is missing, please offer a search database for the Lot Number on the bottle of the Control Solution itself.
Can’t use control lots. Care full entry of Ketone Lot U210006 = invalid. The control solutions; all four LEAKED in shipping. This is the second batch I’ve bought. NO instructions. Over all poor quality control. Difficult to use strips, hard to open, etc. Please e-mail back xbill@mac.com
I have read all your directions and I can’t figure out what the number should be for the control solution it says it should be in number two what does that mean? The numbers won’t import I don’t understand can you just show us a chart or something.
Please cut it out with the screen take over ads as well. Nobody likes them.
There is no range listed!!!!!
Regarding the FAQ on how to look up the calibration number on “https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/” . After entering a valid lot number on the testing strip package as instructed I received the “Enter a Valid Lot Number” error message. My lot numbers are: glucose strip – U210286 and ketone strip – U210293.
My lot numbers are coming up invalid
The lot numbers I am entering are not valid:
Ketone: U210140 and Glucose: U210137
I entered the lot numbers for both multiple times and screen kept listing list a valid number. My Glucose and Keytone lots are U210211 and U210212
Hi – I entered my glucose and ketone lot numbers but nothing happened. It didn’t give me the range for the solutions.
Lot number on back of strips packaging was not found
When I enter my glucose strip lot number above, I get a message saying to enter a valid lot number.
Typed in both lot numbers for ketone and glucose. Both are “not valid.” These came with my new meter. Also, numerous ketone strips are missing. The package was sealed with no strip within, 5 missing in total.
Lot not found U210260
I put in the lot number for both the glucose strip and the ketone strip and they both said to enter in a valid Lot number, which I did. So, it was no help!
I need level 2 control range numbers
There was no answer because it says my lot #’s are invalid. I double checked and they were typed in correctly.
My strips numbers were not in your system
I’m entering the lot number from the back of the glucose test strip package and it just keeps saying “enter a valid lot number.” I’ve double checked it and I’m entering the correct lot number. I just want to know the control test range.
The app said my lot numbers were not valid.
I entered the lot number from the back of the ketone test strip wrapper. I get “enter a valid lot number” message.
displays invalid lot number
Says my lot number not valid. But, that’s what is printed on wrapper. Hmmmm.
Cześć,
The following Lot number do not appear within the lookup to determine the test solutions range:
Ketone: Lot#U210337
Glucouse: Lot#U210338
Could you provide me with the ranges for both? Thank you!
It’s says my lot numbers are invalid
Lot number didn’t work U210043 and my control solution doesn’t have a range
It is saying my lot# is not vail that came with the box. Glucose lot # is U210137 and Ketone lot # is U210138
I am trying to figure out the control range. I went to the website and it is pretty straight forward however when I put in lot code for both glucose and ketones it tells me invalided lot number. Lots numbers are below.
Glucose Lot: U210215
Ketones Lot: U210177
Hi there,
My keto mojo machine is giving me varied blood sugar results with each strip. It looks to be inaccurate. Which makes me wonder if my ketone strips are accurate too?
I was trying to look up my ketone and glucose testing solution ranges to see if my meter is working correctly, but they said I have an invalid lot #?
I’m very confused and dissatisfied because this machine wasn’t cheap!
Please let me know what I can do.
Thank you in advance,
Kelly
Lot# U21022 ketone strips shows as an invalid lot #
Cześć,
I could not find the range for the test strips. The lot number is U210176 for glucose and U210178 for ketone. Thanks!
It’s saying that both my lot numbers are incorrect
My mojo is not working properly …says my control number is in valid …I just bought my mojo + a few months ago from you
Wsparcie
I typed in the number and it said it was invalid. U210370.
cześć
I have the older meter and would like to just purchase strips and the new meter. I don’t want to pay for things I don’t need. Can I purchase strips and meter? Or do you have old strips left? Thank you
I entered my lot number exactly as it shows on the strip – U210038 – and it keeps saying invalid lot number.
I can’t find the control range for L2 vial by using the lot number on my new ketone strips. They say U210004 but your search says invalid. I threw away the box so I don’t have the grey sticker.
My blood sugars seem crazy out of control and I’m trying to use the control solutions but can’t find the sheet of ranges. Tried to use the page and it Jerrod telling me that my lot numbers on the strips aren’t valid
My lot numbers are not “valid” for either of these entries. I have triple-checked by typing.
Glucose: U210284
Ketone: U210287
I entered the lot # and it indicates invalid. Glucose U210086 Keto U210089
Cześć,
Potrzebuję wartości kontrolnych dla pasków glukozy z partii # U210176. Powyższy formularz mówi, że jest nieważny.
Mówi, że moje numery partii są nieprawidłowe.
NUMER SERII POWRACA NIEPRAWIDŁOWY JAK MOGĘ ZNAĆ MÓJ ZAKRES ROZWIĄZAŃ TESTOWYCH?
Mam numer partii kleju U210010 exo 3/26/23. Próbuję potwierdzić zakres kontroli. System mówi, że numer jest nieprawidłowy.
Nie powiedział mi zakresu, kiedy wstawiłem numery partii
Wstawiłem numer partii i wyrzuciłem go, mówiąc: wprowadź prawidłowy numer partii.
Błąd „Wprowadź prawidłowy numer partii”. Numer partii glukozy na moim pasku
Błąd „Wprowadź prawidłowy numer partii”. Numer partii glukozy na moim pasku to U210130
Ten sam błąd dla pasków ketonowych. Numer partii ketonów na moim pasku to U210129
Moje numery partii są nieprawidłowe
Powiedział nieprawidłowy numer partii
MÓWI, ŻE MÓJ NUMER PARTII NIE JEST WAŻNY… ALE NA PEWNO JEST TO, CO JEST NA PASACH…
GLUKOZA U210043 KETON U210046
A wpisał numer partii ketonu: 210082, ale nie jest akceptowany i nie widzę zakresu roztworu kontrolnego.
Nie akceptuje numeru partii.
Numer serii dla glukozy to 210079
Odczyt, który otrzymałem do testu glukozy to 5,7.
Numery partii, które mam dla pasków z glukozą i ketonami, nie są wystarczająco długie dla twojego formularza.
Komunikat o błędzie mówi „Wprowadź prawidłowy numer partii”. wpisuję poprawny numer
Powyższe „zakresy roztworów kontrolnych” Sprawdzenie numeru partii nie potwierdza, że cztery oddzielne numery partii otrzymane w najnowszym pakiecie są nawet ważne!
Numer partii U210176 daje „Wprowadź prawidłowy numer partii”.
Wpisałem swój numer partii na paskach z glukozą i ciągle mówi: wprowadź poprawny numer….Mam!!!
Oba numery partii zostały wpisane poprawnie i oba mówią, że numer partii jest nieprawidłowy. Jak mogę uzyskać moje zakresy, gdy mówi się, że numery partii są nieprawidłowe, gdy tak nie jest?
Mówi mi, abym wpisał prawidłowy numer partii, gdy dokładnie wpisuję poprawny numer partii
Poniżej zamieszczam prawidłowe numery partii. Odpowiedź była nieprawidłowa.
Partia glukozy: U210137
Partia ketonów: U210138
czy możesz mi z tym pomóc?
Dziękuję Ci
Moje paski glukozy wskazują numer partii U210033, a przy wprowadzaniu otrzymuję komunikat o nieprawidłowym numerze partii.
zaktualizuj numer partii szybciej – mamy to od miesięcy, a Twoja witryna mówi o nieprawidłowej partii. sprawdziliśmy trzykrotnie, że wpisujemy poprawnie
Zmierzyłem dziś rano poziom glukozy we krwi i uzyskałem wynik 173, a ketony 2,3. Natychmiast ponownie przetestowałem i uzyskałem odczyt 86 i odczyt „cześć” dla ketonów. Następnie przeprowadziłem kontrole i otrzymałem 106 za pasek z glukozą i 2,4 za pasek z ketonami. Paski ketonowe partia #u210134 i glukoza partia # u210132
W zeszłym miesiącu kupiłem nowy zestaw miernika Keto-Mojo GK+, aby zastąpić mój stary miernik.
Próbuję dowiedzieć się więcej o tym procesie, ale kiedy wprowadzam numery partii na opakowaniach pasków, po prostu pojawia się komunikat „Wprowadź prawidłowy numer partii”, co jest nie tak? Numer partii glukozy to U210176 exp: 2023-06-08,
numer partii ketonowej to U210177 exp: 2023-06-08.
Wspomniany numer partii jest nieprawidłowy
Glukoza U210176
Jaki jest ten cholerny odczyt stężenia dla cholernego std?
W tym szerokim zakresie próbek kontrolnych, w jaki sposób można dokładnie przekonwertować na badanie próbki krwi.
Mój numer partii ketonów i pasków glukozy nie jest wyświetlany, mówi nieważny. Data ważności to 16.04.23
Mówi wprowadź prawidłową podświetloną liczbę. Zrobiłem
Jestem niesamowicie zły na to, że ZMUSIŁEŚ mnie do zakupu nowego licznika i nie synchronizuje się on poprawnie. Postępowałem dokładnie zgodnie z twoimi wskazówkami. Ale mój numer partii okazuje się nieprawidłowy. Paski przyszły z miernikiem na miłość boską.
Chcę to naprawić i naprawdę mam nadzieję, że możesz mi pomóc.
Niedawno kupiłem paski z glukozą. Numer partii jest nieprawidłowy.
U210043
wpisuję numer partii, U210176, i po prostu mówi błąd. też mam wszystkie papiery, które były w pudełku i nie mogę znaleźć tych zakresów?
Próbuję znaleźć liczby poziomu 2 kontroli testu dla mojego urządzenia G+. Dwa numery partii pasków testowych, które posiadam, to Glucose U210176 i Ketone U210177. Proszę podać zakres, w jakim mój miernik powinien powrócić dla tych roztworów testowych Poziom 2 Glukoza UAN20085 i Poziom 2 Keton UEN20072.
Numery partii na paskach dają mi komunikat „Wprowadź prawidłowy numer partii”, a numer wprowadzony z tyłu opakowania pasków jest prawidłowy.
Kiedy wpisuję numer partii z opakowania w powyższym obszarze, jest to nieważny numer partii
Nie można określić zakresu testu kontrolnego dla pasków dostarczonych z zestawem. Numer partii ketonów U210177. Kiedy wchodzę, mówi, wprowadź wartość numer partii
To nie rozpoznaje moich numerów partii.
Podczas próby znalezienia zakresu kontrolnego otrzymuję komunikat „nieprawidłowy numer partii”. Numer partii to U210045
Dlaczego asortyment jest tak duży? Jeśli zakres błędu dla mojego rzeczywistego poziomu cukru we krwi jest tak szeroki, to jest to niepokojące.
Wprowadziłem 2 pudełka z numerami partii i wszystkie są nieważne.
To nie odpowiada mi na żadne pytania. Również, gdy wpisuję numery partii, nie działają. Jestem przekonany, że nie są one nieważne, ale strona nadal mówi mi, abym wpisał prawidłowy numer partii. Wpisuję U210012 dla mojego paska glukozy i U200222 mój pasek ketonowy i nic. Również moje prawdziwe pytanie dotyczyło tego, jakie odczyty powinienem uzyskać z roztworem kontrolnym o numerach partii UAN20050 dla roztworu glukozy i UEN20036 dla roztworu ketonu. Proszę o pomoc i napraw stronę, aby działała poprawnie.
Mój miernik ketonów odczytuje poniżej zakresu roztworu kontrolnego i nie daje mi to żadnych informacji o tym, co to oznacza, jak skalibrować lub zrobić cokolwiek, aby upewnić się, że moje urządzenie odczytuje dokładnie
1.7 czytał
1.8-2.8 to drukowany zakres dla kontroli
W przeglądarce Chrome nie widać, jaki powinien być odczyt konturu. Pasek ketonowy jest wyświetlany jako nieprawidłowy numer partii
Strona nie działa – nie pokazuje strażnika!
Numery partii okazały się nieważne
Nie rozpoznaje numerów partii moich pasków.
To nie zaakceptuje moich numerów partii. Ciągle prosi mnie o podanie prawidłowego numeru partii
Nie rozpoznaje liczby pasków
użył wielu pasków do testowania roztworów kontrolnych.
Oto, co pokazały rozwiązania kontrolne:
Ketony 0,2
Lo . glukozy
Próbowałem wielu pasków bezskutecznie.
FWIW, jestem na 4-dniowym poście. Oto wyniki na tym liczniku
Ketony 7.1
Glukoza 45
Pomoc! czy mam uszkodzony licznik?
Hrabia Hersh
Houston, Teksas
281-460-5968
Próbuję ustalić, jaki powinien być zasięg dla moich rozwiązań kontrolnych, które zostały dostarczone z moim zestawem. Jeśli wprowadzę numer partii, okaże się, że nie został znaleziony.
Kiedy wpisuję numer paska, jest napisane, że jest nieważny, U210010.
mój numer partii pasków ketonowych wydrukowany na odwrocie opakowania to U200181, jednak system nie rozpoznaje go i w czerwonych stanach „wprowadź prawidłowy numer partii”. Czterokrotnie sprawdziłem, czy prawidłowo wpisuję to, co jest wydrukowane na odpowiednim opakowaniu pasków ketonowych, ale twój system tego nie rozpoznaje. mój odczyt testu ketonowego wynosił 2,5, czy mój miernik działa? mój numer partii glukozy to U200169, a odczyt testu to 113. Proszę dać mi znać, co jest nie tak i czy mój glukometr działa poprawnie.
Nie mogę znaleźć numerów roztworów kontrolnych do kalibracji mojego keto-mojo. Kiedy wprowadzam numery partii z moich pasków z glukozą i ketonami, Twoja witryna informuje, że są to nieprawidłowe numery partii
Wpisuję numer partii, ponieważ wyrzuciłem pudełko i próbuję użyć roztworu kontrolnego, a on mówi: wprowadź prawidłowy numer partii. Paski ketonowe U200180. Moje odczyty zmieniają się z 2,4 do 0,4 do 0,2 w ciągu 5 sekund. Po prostu marnuję wszystkie paski, które kupiłem w tym momencie, a niedawno dostałem monitor GK+, ponieważ w zasadzie nas do tego zmusiłeś. To śmieci w porównaniu z oryginalnym monitorem, który od Ciebie kupiłem.
Zakresy kontroli są szerokie. Dla mnie oznacza to niedokładność pomiarów Keto-Mojo. Czy dokładny miernik nie powinien wykazywać mniej zmiennych odczytów przy użyciu standaryzowanych roztworów kontrolnych? Dziękuję.
paski testowe dostarczone z moim keto mojo nie mają żadnego zasięgu na opakowaniu lub paskach, więc nie mam pojęcia, czy wyniki testu roztworu kontrolnego mieszczą się w zakresie.
Numer partii pasków testowych do oznaczania ciał ketonowych jest nieważny (U200180).
numer partii mówi, że jest nieważny. został wpisany poprawnie. U200179 paski ketonowe
Na iPhonie / ketonie wyniki dla poziomu 2 i 3 są odcięte i nie są całkowicie widoczne
Paski do glukozy dostałem podczas podróży po Europie i nie dają one wyniku testu.
1. Nie wiem, co oznaczają liczby.
2. Dolne części liczb zostały obcięte.
Nie potwierdził numeru, poprawnie wpisany z paska testowego.
To nie jest jasne. Mój glukometr rozpoznaje, że użyłem mojego roztworu kontrolnego, a odczyt pokazuje 105, ale zakres na pudełku jest zbyt duży od 96 do 136. To nie mówi mi, czy mój licznik dokładnie odczytuje. Sprawdzałem to dzisiaj, ponieważ mój poziom glukozy we krwi jest nienormalnie niski w latach pięćdziesiątych, a moje ketony są nienormalnie wysokie na poziomie 1,9
Wprowadziłem numer partii ketonów, ale to narzędzie mówi, że jest nieprawidłowy. Trzykrotnie to sprawdziłem i został wpisany poprawnie