Har du feilaktig kastet eller mistet målerboksen eller stripeboksen?
Ikke noe problem, vi har dekket deg!
Hvis du har kjøpt et GK + metersett, finner du glukose og ketonstrimler inni. På baksiden av stripeinnpakningen finner du MYE nummer. Dette tallet tilsvarer kontrolløsningsområdene som er trykt på bunnen av målesettboksen. På samme måte, hvis du har kjøpt en boks med glukosestriper, ketonstrimler eller kombinasjonspakken med strimler, blir kontrollområdene dine skrevet ut på den boksen.
Hvis du ikke lenger har tilgang til målerboksen eller stripeboksen, kan du skrive inn MYE antall striper i skjemaet nedenfor, så forteller vi deg hva kontrollområdene dine er. De glukoselottnummer vil avvike fra keton-partinummer, og du får kontrollområdet for begge Nivå 2 og Nivå 3 løsninger (kontrolløsninger ble levert med målesettet eller kan kjøpes separat).
Skriv ned disse områdene og oppbevar dem i tilbehørssaken til målesettet. Vær imidlertid oppmerksom på at kontrollområdene kan endres hver gang du kjøper nye striper. Sørg for å oppbevare nye stripefelt som referanse.
Roughly a third of the time I test I get error messages requiring me to use a new test strip. Error e3 or e4. This is an unacceptable frequency of errors since the test strips cost about 50 cents each. Sometimes it takes as many as 3 strips before I get an acceptable reading. What can be done to reduce the errors or reduce the cost of the strips?
Do you deliver to Canada
So.what is the range?
I tried to find my solution number but it says invalid. UAN20089 for glucose, UEN20077 for Keto.
I had to order additional KM test strips. My meter appears to be way off. I am trying to use the control solution, yet the Lot number on my test strips is coming up as invalid. This is incredibly frustrating as the device is useless to me as long as the readings are off and I cannot determine by how much. I need to speak with someone about this.
Trying to find range for my level 2 ketone test solution. The ketone lot: U210293 but tool says not valid number.
my blood sugar is high for no apparent reason and i’m concerned that my meter is not reading correctly. i typed in U210277 above and get an ‘Enter a valid Lot Number.’ message and these don’t expire until 9/23. i don’t have my org box or solution. where do i go from here? i didn’t see a video addressing this issue but maybe i missed it. i would appreciate a quick response. thanks.
it says invalid lot number on both u210286 and u210291 exp 2023-09-18 on both
I’m using the strips that came with the Meter Kit and need the test ranges. Blood glucose strip = U210259; Ketone strip = U210260. Error message for each comes up in red as “Enter a valid Lot Number”.
Says my lot numbers are invalid on both strips, but I put in what the package said, 3 times
I am typing in the lot number exactly as it is on the foil pack but it’s coming up invalid. A waste of another strip and frankly, too many are getting wasted due to this things inconsistency. My old keto mojo one was far better to use
Lot number does not work with this tool. there is no letter on the wrapper just a six digit number
I am entering the lot number on the back of my strip U210259. I keep getting an error message saying “enter a valid lot number”. The expiration date on the strips is 08/17/2023 so they should still be valid.
Months later and multiple different packs of test strips, your website still says every single lot nimber doesn’t exist. Please update your website so I can use the damn product. Many of us are having the same issue. Gonna return on amazon shortly.
When trying to look up the test reference range, I enter the lot numbers exactly as they appear on the strip wrapper and get an invalid lot number message. I tried several times.
Entered lot number and it says to enter a valid lot number….well it is the lot number on test strip pkg. A joke !!@ I am trying to use control solution because reading on mojo glucose is 30% different than my other glucose meters
The lot on the back of the strip is not recognized
I get “Enter a valid Lot Number” each time and I know I typed it in correctly.
my lot numbers are indicating invalid?
my lot numbers are: glucose U210086
ketone U210089
what’s up!
Said lot numbers are invalid
It says my lot number (U210259) is invalid
I put in the lot numbers but was told it was invalid. I’m looking right at the number on the strip package just like the picture shows.
lot # doesn’t work in website here
https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/
U210177
U210176
My monitor is testing I correctly. I have used the glucose solution and it came back 109. I have lot #u210205 per the back of the strip. When I input this into the search, it isn’t coming back.
Please let me know how to accurately test my system and if the testing is currently reading correctly for this lot
The lot number i entering came back as “invalid”
I put my Lot #s in and it says not valid. 😑 I double checked that I put in the glucose and ketone correctly in the right boxes
Glucose test strip lot# U210137 and Ketone test strip lot# U210138 entered. Enter a valid Lot Number comes up. Fortunately I found the control solutions ranges on the bottom of the box on a sticker.
Angi lotnummer for glukosestripe
U210137
Enter a valid Lot Number
Angi partinummer for ketonstrimmel
U210138
Angi et gyldig partinummer.
Beginning to think i got scammed. My lot number is called invalid
both my glucose & my ketone control numbers are 2
I entered the lot number correctly U210176 & U210177 and it said that it was an invalid number
Typed the lot numbers U210286 and U210291 and it said “Enter a valid lot number” – I entered what I have. Unless.
Hallo
I entered the LOT number: U210038 and it said it wasn’t a valid LOT number???
I am having problems with monitor and what I believe inaccuracy and want to test to ensure its working properly! Could someone please get in touch to help me out?
IT TOLD ME BOTH OF MY LOT NUMBERS WERE INVALID
I am taking the number off my package and it say invalid! 😢
Lot numbers on back of my straps do not come up as valid lots.
Unable to view control ranges of straps. Control results don’t appear in sync.
My lot number says it’s invalid but I’ve triple checked that the number on the test strip packet is correct.
so i typed in the lot number from the box, and the back of the test strips, and got an “invalid lot number” message
u210127
how can I find the control range ?
i put in the lot numbers and it is coming up invalid
I tested my keto mojo as when I test myself ketos keep coming up Lo not saying that is wrong
but when I tested w the solution I was informed my reading may be high
Please advise as to what I should do next lot # ketone strips U210089
glucose strips U210086
I am looking to order more lancets and both strips but very hesitant if I am going to have to get another meter
God Bless and
Thank You so Much
Denise Decker
Received an error that my lot number was invalid, “Enter a valid Lot Number”. Just received my unit and wanted to perform a control test. There is no control ranges on the packets.
I think my machine is off based on the numbers I’ve been receiving. I used brand new testing solution and at level 2 the numbers are 42 points higher than stated in the package insert and with level 3 they are 55 points lower than stated. I’m not sure how to proceed from here. Please let me know if this is fixable
Your system did not find my lot number U210277
It said invalid lot number for both and I entered them correctly.
It says “enter valid lot #. I did that.
I enter the lot number of my glucose test strips and it says invalid lot number. I did it multiple times and it still does not work. I need to know what the range is for the glucose control solution for level two. The lot number is U210259
My ketone strip lot number is U210293. But your silly website is indicating it is an invalid lot number. I’ve checked it 5 times now. So your website is simply pissing me off.
It’s telling me my lot # is invalid
I keep having a response on this page of “Enter a Valid Lot Number”. Glucose: U210284 Ketone: UEN20059
Lot number invalid
When I entered my lot number to see what the control numbers are it said it was invalid, Please let me know how to verify if my machine is calibrated. Thank you
The lot number on my test strips came in as a “invalid number” (U210288)
…not sure what to do from here.
The lot numbers didn’t work
I’m still very confused about how to calibrate my meter using these control solutions. I got some new strips and they seem inaccurate compared to the strips I had before. These regularly show my ketones as too low and my glucose too high, by around 15 points. I thought I remembered that we could calibrate these. I’ll keep looking to see if I can find the original instructions that came with the GK+ meter.
I bought the kit with solutions and both strips in the kits there Lots keeps reading not valid. U210177… i’m trying to figure out if my meter is calibrated and don’t know the ranges???
I enter the lot number exactly as it is shown and I get a message saying “enter a valid lot number”. It IS a valid lot number! My ketone strip lot number is U210212
My lot numbers are from the keto mojo kit and it’s saying enter a valid lot number. These are valid lot numbers.
Update lot range U210222 not displaying
Trying to do a control solution test. The lot number on the strip, U210038 comes up as invalid. When I do the control solution test, the meter simply reads “LO” I do not know what this means. I would guess it’s reading high, but am not sure how to test and/or calibrate it…
Glucose lot number U210176
Ketone lot number U210177
I need the control ranges and the form above says my lot numbers are invalid.
Takk skal du ha
I typed in the lot number for glucose (U210288) and then for ketone strip (U210295) and it responded with “Enter Valid Lot Number” for each
It says my lot number is not right…but it is on the package.
You have a place to enter lot #s to look up control solution ranges: but you don’t provide the actual control solution ranges after we enter the lot numbers! There’s no enter button and hitting enter in either of the lot # edit fields does submit the information for a response either. PLEASE FIX THIS BUG!!!
None of my lot numbers work
U210242
U210211. G
U210259. G
U210210. K
My meter will not sync with the app. Please advise
1. I put in the lot numbers but the control range did not come up!
Here are my lot numbers:
Glucose: 210418
Ketone: 210419
I need the control range for level 2
2. How do I delete the test score from the device as it will alter my true averages?
The lost number on my test strip can up invalid but I entered the correct lot number numerous times. Additionally, the instructions in the kit indicated the test range values would be on the test strip or box and they are not.
Hi, I was trying to check if my meter is ok on the glucose end.
I entered my lot number of U220035 and you said invalid.
I ran a test from solution and it showed 122, but what does that mean? My solution is level 2?
How in heck do you gave a control solution with such a wide range of 88 to 132 mg/dL? This apparently does not give a reading of what a within normal limits glucose is when non-keto?
My lot number doesn’t give any result. It’s 210418, without a letter in front of it. I tried it with all letters of the alphabet by the way, but nothing works.
I’m getting an error that my lot numbers are invalid. U210044 and U210045, both expire in 2023
I could not find my control solution ranges for glucose.
I used 220035 for glucose strips and was not found.
Then I tried the lot number on the control solution UAN20104 and got the same response
I’m entering my lot number and it is saying invalid
U210286 exp 2023-09-18
I just purchased
I put my lot numbers on the site and it says nvalid. This is what is on the strip packages and purchase box!!
Says invalid lot number but its literally what is on the strips
I enter my lot number exactly and it states invalid number. Trying to find out what the control range is.
The lot numbers come back as “invalid” but they are definitely correct
I entered the lot number for the test strips to find the control solution ranges. It tells me I have entered an invalid lot number. It seems the system does not have information for newer test strips.
I enter the lote number on the trips and “Enter a valid Lot Number” message appear, I check it like 5 time to make sure the lot is correct,,, also I enter the lot with and without the “U”
Look up doesn’t work. My lot number comes back invalid. U210213
To find the range for the Control Solution if the box is missing, please offer a search database for the Lot Number on the bottle of the Control Solution itself.
Can’t use control lots. Care full entry of Ketone Lot U210006 = invalid. The control solutions; all four LEAKED in shipping. This is the second batch I’ve bought. NO instructions. Over all poor quality control. Difficult to use strips, hard to open, etc. Please e-mail back xbill@mac.com
I have read all your directions and I can’t figure out what the number should be for the control solution it says it should be in number two what does that mean? The numbers won’t import I don’t understand can you just show us a chart or something.
Please cut it out with the screen take over ads as well. Nobody likes them.
There is no range listed!!!!!
Regarding the FAQ on how to look up the calibration number on “https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/” . After entering a valid lot number on the testing strip package as instructed I received the “Enter a Valid Lot Number” error message. My lot numbers are: glucose strip – U210286 and ketone strip – U210293.
My lot numbers are coming up invalid
The lot numbers I am entering are not valid:
Ketone: U210140 and Glucose: U210137
I entered the lot numbers for both multiple times and screen kept listing list a valid number. My Glucose and Keytone lots are U210211 and U210212
Hi – I entered my glucose and ketone lot numbers but nothing happened. It didn’t give me the range for the solutions.
Lot number on back of strips packaging was not found
When I enter my glucose strip lot number above, I get a message saying to enter a valid lot number.
Typed in both lot numbers for ketone and glucose. Both are “not valid.” These came with my new meter. Also, numerous ketone strips are missing. The package was sealed with no strip within, 5 missing in total.
Lot not found U210260
I put in the lot number for both the glucose strip and the ketone strip and they both said to enter in a valid Lot number, which I did. So, it was no help!
I need level 2 control range numbers
There was no answer because it says my lot #’s are invalid. I double checked and they were typed in correctly.
My strips numbers were not in your system
I’m entering the lot number from the back of the glucose test strip package and it just keeps saying “enter a valid lot number.” I’ve double checked it and I’m entering the correct lot number. I just want to know the control test range.
The app said my lot numbers were not valid.
I entered the lot number from the back of the ketone test strip wrapper. I get “enter a valid lot number” message.
displays invalid lot number
Says my lot number not valid. But, that’s what is printed on wrapper. Hmmmm.
Hello,
The following Lot number do not appear within the lookup to determine the test solutions range:
Ketone: Lot#U210337
Glucouse: Lot#U210338
Could you provide me with the ranges for both? Thank you!
It’s says my lot numbers are invalid
Lot number didn’t work U210043 and my control solution doesn’t have a range
It is saying my lot# is not vail that came with the box. Glucose lot # is U210137 and Ketone lot # is U210138
I am trying to figure out the control range. I went to the website and it is pretty straight forward however when I put in lot code for both glucose and ketones it tells me invalided lot number. Lots numbers are below.
Glucose Lot: U210215
Ketones Lot: U210177
Hi there,
My keto mojo machine is giving me varied blood sugar results with each strip. It looks to be inaccurate. Which makes me wonder if my ketone strips are accurate too?
I was trying to look up my ketone and glucose testing solution ranges to see if my meter is working correctly, but they said I have an invalid lot #?
I’m very confused and dissatisfied because this machine wasn’t cheap!
Please let me know what I can do.
Thank you in advance,
Kelly
Lot# U21022 ketone strips shows as an invalid lot #
Hei,
I could not find the range for the test strips. The lot number is U210176 for glucose and U210178 for ketone. Thanks!
It’s saying that both my lot numbers are incorrect
My mojo is not working properly …says my control number is in valid …I just bought my mojo + a few months ago from you
Hjelp
I typed in the number and it said it was invalid. U210370.
Hallo
I have the older meter and would like to just purchase strips and the new meter. I don’t want to pay for things I don’t need. Can I purchase strips and meter? Or do you have old strips left? Thank you
I entered my lot number exactly as it shows on the strip – U210038 – and it keeps saying invalid lot number.
I can’t find the control range for L2 vial by using the lot number on my new ketone strips. They say U210004 but your search says invalid. I threw away the box so I don’t have the grey sticker.
Blodsukkeret mitt virker sprøtt ute av kontroll, og jeg prøver å bruke kontrollløsningene, men finner ikke oversikten. Prøvde å bruke siden, og Jerrod fortalte meg at partinumrene mine på stripene ikke er gyldige
Mine partinumre er ikke "gyldige" for noen av disse oppføringene. Jeg har trippelsjekket ved å skrive.
Glukose: U210284
Keton: U210287
Jeg skrev inn partiet # og det indikerer ugyldig. Glukose U210086 Keto U210089
Hei,
Jeg trenger kontrollverdiene for glukosestrips fra partiet # U210176. Skjemaet ovenfor sier at det ikke er gyldig.
Det står at partinummeret mitt er ugyldig.
LOTNUMMER KOMMER TILBAKE Ugyldig HVORDAN VET JEG MIN TESTLØSNINGSOMRÅDE?
Jeg har limstrimmel lotnummer U210010 exo 3/26/23. Jeg prøver å bekrefte kontrollområdet. Systemet sier at nummeret ikke er gyldig.
Den fortalte meg ikke rekkevidden da jeg la inn lottallene
Jeg la inn lotnummeret, og det kastet det ut og sa skriv inn gyldig lotnummer.
Feil "Skriv inn et gyldig partinummer". Glukose lotnummer på stripen min
Feil "Skriv inn et gyldig partinummer". Lotnummeret for glukose på stripen min er U210130
Samme feil for ketonstrimler. Ketonlotnummeret på stripen min er U210129
Lottnumrene mine kommer opp som ugyldige
Sa ugyldig lotnummer
SIER LOTTNUMMERET MITT IKKE ER GYLDIG... MEN DET ER VISST DET SOM STÅR PÅ STRIPENE...
GLUKOSE U210043 KETONE U210046
A skrev inn ketonlotnummeret: 210082, men det er ikke akseptert og jeg kan ikke se kontrollløsningsområdet.
Den godtar ikke lotnummeret.
Lotnummer for glukose er 210079
Avlesningen jeg fikk for glukosetesten er 5,7.
Lottallene jeg har for både glukose- og ketonstrimler er ikke lange nok for formen din.
Feilmeldingen sier "Skriv inn et gyldig partinummer." Jeg skriver inn riktig nummer
Ovennevnte "kontrollløsningsområder" Lotnummerkontroll er ikke en bekreftelse på at de fire separate lotnumrene mottatt i den siste pakken er gyldige!
Lottnummer U210176 gir "Skriv inn et gyldig partinummer."
Jeg har skrevet inn lotnummeret mitt på glukosestripene og det står hele tiden skriv inn et gyldig nummer...Jeg har!!!
Begge lotnumrene er skrevet inn riktig og begge sier at lotnummeret er ugyldig. Hvordan kan jeg få rangene mine når dette sier at partinumrene er ugyldige når de ikke er det??
Den forteller meg å skrive inn et gyldig lotnummer når jeg er nøyaktig oppgitt riktig lotnummer
Jeg legger inn de riktige lotnummerene nedenfor. Svaret var at de var ugyldige.
Glukoseparti: U210137
Ketonmengde:U210138
Kan du hjelpe meg med dette?
Takk skal du ha
Glukosestrimlene mine indikerer et partinummer av U210033, og jeg får ugyldig partinummermelding når jeg går inn.
oppdater lotnummeret ditt raskere – vi har hatt dette i flere måneder, og nettstedet ditt sier ugyldig parti. vi trippelsjekket at vi skriver det inn riktig
Jeg testet blodsukkeret i morges og fikk en avlesning på 173 og ketoner på 2,3. Jeg testet umiddelbart på nytt og fikk en lesning på 86 og en lesning på hei for ketoner. Jeg kjørte deretter kontroller og fikk 106 for glukosestripen og 2,4 for ketonstrimmelen. Ketonstrimmel lot #u210134 og glukose lot# u210132
Forrige måned kjøpte jeg et nytt Keto-Mojo GK+ målersett for å erstatte min gamle måler.
Jeg prøver å lære mer om prosessen, men når jeg skriver inn partinumrene på stripepakkene får jeg bare meldingen "Skriv inn et gyldig partinummer", hva er galt? Lotnummeret for glukose er U210176 exp: 2023-06-08,
ketonlotnummeret er U210177 exp:2023-06-08.
Nevnte lotnummer er ikke gyldig
Glukose U210176
Hva er den jævla konsentrasjonsavlesningen for den jævla std?
Hvordan kan du nøyaktig konvertere til blodprøveprøver i dette brede kontrollprøveutvalget.
Lotnummeret mitt for keton- og glukosestrips vises ikke, sier ugyldig. Utløpsdato er 16.04.23
Sier å angi et gyldig opplyst nummer. jeg gjorde
Jeg er utrolig sint over det faktum at du TVINGER meg til å kjøpe en ny måler og den synkroniserer ikke riktig. Jeg fulgte instruksjonene dine nøyaktig. Men lotnummeret mitt viser seg å ikke være gyldig. Stripene fulgte for guds skyld med måleren.
Jeg vil ha dette fikset, og jeg håper virkelig du kan hjelpe meg.
Jeg har nylig kjøpt glukosestrips. Lottnummeret kommer opp ugyldig.
U210043
jeg skriver inn partinummeret, U210176, og det står bare feil. Jeg har også alle papirene som var i esken og finner ikke disse områdene
Jeg prøver å finne testkontrollnivå 2-numrene for G+-enheten min. De to lotnumrene for teststrimmeler jeg har er Glucose U210176 og Ketone U210177. Fortell meg hvilken rekkevidde måleren min skal returnere for disse testløsningene nivå 2 Glucose UAN20085 og nivå 2 Ketone UEN20072.
lotnumrene på stripene gir meg meldingen "Skriv inn et gyldig lotnummer" og nummeret som er skrevet inn fra baksiden av stripeboksen er riktig.
Når jeg skriver inn lotnummeret ut av pakken i området ovenfor, står det ugyldig lotnummer
Kan ikke finne ut kontrolltestområdet for strips som fulgte med settet. Ketonstrimmel lotnummer U210177. Når jeg skriver inn sier skriv inn verdi lotnummer
Dette gjenkjenner ikke lottallene mine.
Jeg mottar en "ugyldig partinummer"-melding når jeg prøver å finne kontrollområde. Partinummeret er U210045
Hvorfor er rekkevidden så stor? Hvis feilområdet for mitt faktiske blodsukker er så bredt, er det bekymringsfullt.
Jeg har lagt inn 2 bokser lotnumbers og dine har alle kommet opp som ugyldige.
Dette svarer ikke på noen spørsmål for meg. Også når jeg skriver inn partinumrene fungerer de ikke. Jeg er sikker på at de ikke er ugyldige, men siden fortsetter å fortelle meg å skrive inn et gyldig partinummer. Jeg skriver inn U210012 for min glukosestripe og U200222 min ketonstrimmel og ingenting. Mitt virkelige spørsmål handlet også om hvilke avlesninger jeg skulle få med kontrolløsningen med lotnumre UAN20050 for glukoseoppløsningen, og UEN20036 for ketonløsningen. Vennligst hjelp og fikse siden for å fungere skikkelig.
Ketonmåleren min leser under kontrollløsningens område, og dette gir meg ingen informasjon om hva det betyr eller hvordan jeg skal kalibrere eller gjøre noe for å sikre at enheten min leser nøyaktig
1.7 leste
1.8-2.8 er det trykte området for kontrollen
I Chrome kan ikke nettleseren se hva konturavlesningen skal være. Ketonstrimmel vises som ugyldig partinummer
Siden fungerer ikke - den viser ikke rangeren!
Partinumrene kom opp som ugyldige
Den gjenkjenner ikke partinumrene for stripene mine.
Dette godtar ikke partinumrene mine. Be meg om å angi et gyldig partinummer
Kjenner ikke igjen nummeret på stripene
brukte mange strimler for å teste kontrollløsningene.
Her er hva kontrolløsningene viste:
Ketoner .2
Glukose Lo
Jeg prøvde mange strimler uten resultat.
FWIW, jeg er på en 4 dagers faste. Per denne måleren er her resultatene
Ketoner 7.1
Glukose 45
Hjelp! har jeg en defekt måler?
Earl Hersh
Houston TX
281-460-5968
Jeg prøver å finne ut hva rekkevidden skal være for kontrollløsningene mine som fulgte med settet mitt. Hvis jeg skriver inn lotnummeret kommer det opp som ikke funnet.
Når jeg legger inn stripenummeret står det at det er ugyldig, U210010.
mitt ketonstrimler -lotnummer trykt på baksiden av stripepakken er U200181, men systemet ditt gjenkjenner det ikke, og i røde tilstander "skriv inn et gyldig lotnummer". Jeg har firdobbelt sjekket at jeg skriver inn det som er skrevet ut på riktig ketonstrimmelpakke, men systemet ditt gjenkjenner det ikke. min keton testavlesning var 2,5, fungerer måleren min? glukoselotnummeret mitt er U200169 og testavlesningen var 113. Vennligst gi meg beskjed om hva som er galt og om måleren min fungerer som den skal.
Jeg finner ikke kontrolløsningsnumrene for å kalibrere min keto-mojo. Når jeg skriver inn lotnumrene fra glukose- og ketonstrimlene, sier nettstedet ditt at de er ugyldige lotnumre
Jeg skriver inn partinummeret mitt fordi jeg kastet ut esken og prøver å bruke kontrolløsningen, og det står å skrive inn gyldig lotnummer. U200180 ketonstrimler. Mine avlesninger går fra 2,4 til .4 til .2 på 5 sekunder. Jeg kaster bare bort alle stripene jeg kjøpte på dette tidspunktet, og jeg fikk nettopp GK+ -monitoren for ikke lenge siden fordi du i utgangspunktet tvang oss til det. Det er søppel sammenlignet med den originale skjermen jeg kjøpte av deg.
Kontrollområdene er brede. For meg betyr det at Keto-Mojo-målinger er unøyaktige. Bør ikke en nøyaktig måler demonstrere en mindre variabel avlesning ved hjelp av standardiserte kontrollløsninger? Takk.
teststrimlene som fulgte med min keto mojo, har ingen rekkevidde på emballasjen eller stripene, så jeg aner ikke om testløsningens testresultater er i området.
Partinummer for ketonteststrimler vises som ugyldig (U200180).
partinummer sier at det ikke er gyldig. den ble tastet inn riktig. U200179 ketonstrimler
På iPhone / keton blir resultatene for nivå 2 og nivå 3 avskåret og ikke helt synlige
Jeg fikk glukosestripene mine mens jeg reiste i Europa, og de gir ikke et testresultat.
1. Jeg vet ikke hva tallene betyr.
2. Bunnen av tallene ble kuttet av.
Bekreftet ikke nummeret, riktig angitt fra teststrimmelen.
Det er ikke klart. Måleren min kjenner igjen at jeg brukte kontrolløsningen min og avlesningen viser 105, men rekkevidden på esken er for stor 96 til 136. Det er ikke å fortelle meg om måleren min leser nøyaktig. Jeg sjekket det i dag fordi blodsukkeret mitt er unormalt lavt på 50-tallet og ketonene mine er unormalt høye på 1,9
Jeg skrev inn nummeret på Ketone, men dette verktøyet sier at det er ugyldig. Jeg har trippel sjekket det, og det ble skrevet riktig