Gamme di soluzioni di controllo GK +

  • Ultimo aggiornamento 18 settembre 2021

Hai erroneamente buttato via o perso la scatola del kit del misuratore o la scatola delle strisce?

Nessun problema, ti abbiamo coperto!

 

Se hai acquistato un kit misuratore GK +, all'interno troverai strisce di glucosio e chetoni. Sul retro dell'involucro della striscia, troverai un numero di LOTTO. Quel numero corrisponde agli intervalli della soluzione di controllo stampati sul fondo della confezione del kit del misuratore. Allo stesso modo, se hai acquistato una scatola di strisce di glucosio, strisce chetoniche o il pacchetto combinato di strisce, i tuoi intervalli di controllo sono stampati su quella scatola.

Se non si ha più accesso alla confezione del kit del misuratore o alla confezione delle strisce, è possibile inserire il file LOT numero delle tue strisce nel modulo sottostante e ti diremo quali sono i tuoi intervalli di controllo. Il numero di lotto del glucosio sarà diverso dal numero di lotto del chetonee otterrai l'intervallo di controllo per entrambi Livello 2 e Livello 3 soluzioni (le soluzioni di controllo sono state fornite con il kit del misuratore o possono essere acquistate separatamente).

Annotare questi intervalli e conservarli nella custodia degli accessori del kit del misuratore. Tieni presente, tuttavia, che ogni volta che acquisti nuove strisce, i tuoi intervalli di controllo potrebbero cambiare. Assicurati di conservare tutte le nuove scatole di strisce per riferimento.

Dove trovo il numero di lotto della mia striscia di glucosio?

Glucose Strip

Dove trovo il numero di lotto della mia striscia chetonica?

Ketone Strip

abbiamo risposto alla tua domanda?

180 reviews

  1. Roughly a third of the time I test I get error messages requiring me to use a new test strip. Error e3 or e4. This is an unacceptable frequency of errors since the test strips cost about 50 cents each. Sometimes it takes as many as 3 strips before I get an acceptable reading. What can be done to reduce the errors or reduce the cost of the strips?

  2. I tried to find my solution number but it says invalid. UAN20089 for glucose, UEN20077 for Keto.

  3. I had to order additional KM test strips. My meter appears to be way off. I am trying to use the control solution, yet the Lot number on my test strips is coming up as invalid. This is incredibly frustrating as the device is useless to me as long as the readings are off and I cannot determine by how much. I need to speak with someone about this.

  4. Trying to find range for my level 2 ketone test solution. The ketone lot: U210293 but tool says not valid number.

  5. my blood sugar is high for no apparent reason and i’m concerned that my meter is not reading correctly. i typed in U210277 above and get an ‘Enter a valid Lot Number.’ message and these don’t expire until 9/23. i don’t have my org box or solution. where do i go from here? i didn’t see a video addressing this issue but maybe i missed it. i would appreciate a quick response. thanks.

  6. I’m using the strips that came with the Meter Kit and need the test ranges. Blood glucose strip = U210259; Ketone strip = U210260. Error message for each comes up in red as “Enter a valid Lot Number”.

  7. Says my lot numbers are invalid on both strips, but I put in what the package said, 3 times

  8. I am typing in the lot number exactly as it is on the foil pack but it’s coming up invalid. A waste of another strip and frankly, too many are getting wasted due to this things inconsistency. My old keto mojo one was far better to use

  9. Lot number does not work with this tool. there is no letter on the wrapper just a six digit number

  10. I am entering the lot number on the back of my strip U210259. I keep getting an error message saying “enter a valid lot number”. The expiration date on the strips is 08/17/2023 so they should still be valid.

  11. Months later and multiple different packs of test strips, your website still says every single lot nimber doesn’t exist. Please update your website so I can use the damn product. Many of us are having the same issue. Gonna return on amazon shortly.

  12. When trying to look up the test reference range, I enter the lot numbers exactly as they appear on the strip wrapper and get an invalid lot number message. I tried several times.

  13. Entered lot number and it says to enter a valid lot number….well it is the lot number on test strip pkg. A joke !!@ I am trying to use control solution because reading on mojo glucose is 30% different than my other glucose meters

  14. I get “Enter a valid Lot Number” each time and I know I typed it in correctly.

  15. my lot numbers are indicating invalid?

    my lot numbers are: glucose U210086
    ketone U210089
    what’s up!

  16. I put in the lot numbers but was told it was invalid. I’m looking right at the number on the strip package just like the picture shows.

  17. My monitor is testing I correctly. I have used the glucose solution and it came back 109. I have lot #u210205 per the back of the strip. When I input this into the search, it isn’t coming back.

    Please let me know how to accurately test my system and if the testing is currently reading correctly for this lot

  18. I put my Lot #s in and it says not valid. 😑 I double checked that I put in the glucose and ketone correctly in the right boxes

  19. Glucose test strip lot# U210137 and Ketone test strip lot# U210138 entered. Enter a valid Lot Number comes up. Fortunately I found the control solutions ranges on the bottom of the box on a sticker.

    Immettere il numero di lotto della striscia di glucosio
    U210137
    Enter a valid Lot Number

    Immettere il numero di lotto della striscia chetonica
    U210138
    Immettere un numero di lotto valido.

  20. I entered the lot number correctly U210176 & U210177 and it said that it was an invalid number

  21. Typed the lot numbers U210286 and U210291 and it said “Enter a valid lot number” – I entered what I have. Unless.

  22. Ciao
    I entered the LOT number: U210038 and it said it wasn’t a valid LOT number???
    I am having problems with monitor and what I believe inaccuracy and want to test to ensure its working properly! Could someone please get in touch to help me out?

  23. Lot numbers on back of my straps do not come up as valid lots.

    Unable to view control ranges of straps. Control results don’t appear in sync.

  24. My lot number says it’s invalid but I’ve triple checked that the number on the test strip packet is correct.

  25. so i typed in the lot number from the box, and the back of the test strips, and got an “invalid lot number” message

    u210127

    how can I find the control range ?

  26. i put in the lot numbers and it is coming up invalid

    I tested my keto mojo as when I test myself ketos keep coming up Lo not saying that is wrong
    but when I tested w the solution I was informed my reading may be high

    Please advise as to what I should do next lot # ketone strips U210089
    glucose strips U210086

    I am looking to order more lancets and both strips but very hesitant if I am going to have to get another meter

    God Bless and
    Thank You so Much

    Denise Decker

  27. Received an error that my lot number was invalid, “Enter a valid Lot Number”. Just received my unit and wanted to perform a control test. There is no control ranges on the packets.

  28. I think my machine is off based on the numbers I’ve been receiving. I used brand new testing solution and at level 2 the numbers are 42 points higher than stated in the package insert and with level 3 they are 55 points lower than stated. I’m not sure how to proceed from here. Please let me know if this is fixable

  29. I enter the lot number of my glucose test strips and it says invalid lot number. I did it multiple times and it still does not work. I need to know what the range is for the glucose control solution for level two. The lot number is U210259

  30. My ketone strip lot number is U210293. But your silly website is indicating it is an invalid lot number. I’ve checked it 5 times now. So your website is simply pissing me off.

  31. I keep having a response on this page of “Enter a Valid Lot Number”. Glucose: U210284 Ketone: UEN20059

  32. When I entered my lot number to see what the control numbers are it said it was invalid, Please let me know how to verify if my machine is calibrated. Thank you

  33. The lot number on my test strips came in as a “invalid number” (U210288)
    …not sure what to do from here.

  34. I’m still very confused about how to calibrate my meter using these control solutions. I got some new strips and they seem inaccurate compared to the strips I had before. These regularly show my ketones as too low and my glucose too high, by around 15 points. I thought I remembered that we could calibrate these. I’ll keep looking to see if I can find the original instructions that came with the GK+ meter.

  35. I bought the kit with solutions and both strips in the kits there Lots keeps reading not valid. U210177… i’m trying to figure out if my meter is calibrated and don’t know the ranges???

  36. I enter the lot number exactly as it is shown and I get a message saying “enter a valid lot number”. It IS a valid lot number! My ketone strip lot number is U210212

  37. My lot numbers are from the keto mojo kit and it’s saying enter a valid lot number. These are valid lot numbers.

  38. Trying to do a control solution test. The lot number on the strip, U210038 comes up as invalid. When I do the control solution test, the meter simply reads “LO” I do not know what this means. I would guess it’s reading high, but am not sure how to test and/or calibrate it…

  39. Glucose lot number U210176
    Ketone lot number U210177

    I need the control ranges and the form above says my lot numbers are invalid.
    Grazie

  40. I typed in the lot number for glucose (U210288) and then for ketone strip (U210295) and it responded with “Enter Valid Lot Number” for each

  41. You have a place to enter lot #s to look up control solution ranges: but you don’t provide the actual control solution ranges after we enter the lot numbers! There’s no enter button and hitting enter in either of the lot # edit fields does submit the information for a response either. PLEASE FIX THIS BUG!!!

  42. None of my lot numbers work

    U210242
    U210211. G
    U210259. G
    U210210. K

  43. 1. I put in the lot numbers but the control range did not come up!
    Here are my lot numbers:
    Glucose: 210418
    Ketone: 210419
    I need the control range for level 2

    2. How do I delete the test score from the device as it will alter my true averages?

  44. The lost number on my test strip can up invalid but I entered the correct lot number numerous times. Additionally, the instructions in the kit indicated the test range values would be on the test strip or box and they are not.

  45. Hi, I was trying to check if my meter is ok on the glucose end.

    I entered my lot number of U220035 and you said invalid.
    I ran a test from solution and it showed 122, but what does that mean? My solution is level 2?

  46. How in heck do you gave a control solution with such a wide range of 88 to 132 mg/dL? This apparently does not give a reading of what a within normal limits glucose is when non-keto?

  47. My lot number doesn’t give any result. It’s 210418, without a letter in front of it. I tried it with all letters of the alphabet by the way, but nothing works.

  48. I’m getting an error that my lot numbers are invalid. U210044 and U210045, both expire in 2023

  49. I could not find my control solution ranges for glucose.
    I used 220035 for glucose strips and was not found.
    Then I tried the lot number on the control solution UAN20104 and got the same response

  50. I’m entering my lot number and it is saying invalid
    U210286 exp 2023-09-18
    I just purchased

  51. I put my lot numbers on the site and it says nvalid. This is what is on the strip packages and purchase box!!

  52. I enter my lot number exactly and it states invalid number. Trying to find out what the control range is.

  53. I entered the lot number for the test strips to find the control solution ranges. It tells me I have entered an invalid lot number. It seems the system does not have information for newer test strips.

  54. I enter the lote number on the trips and “Enter a valid Lot Number” message appear, I check it like 5 time to make sure the lot is correct,,, also I enter the lot with and without the “U”

  55. To find the range for the Control Solution if the box is missing, please offer a search database for the Lot Number on the bottle of the Control Solution itself.

  56. Can’t use control lots. Care full entry of Ketone Lot U210006 = invalid. The control solutions; all four LEAKED in shipping. This is the second batch I’ve bought. NO instructions. Over all poor quality control. Difficult to use strips, hard to open, etc. Please e-mail back xbill@mac.com

  57. I have read all your directions and I can’t figure out what the number should be for the control solution it says it should be in number two what does that mean? The numbers won’t import I don’t understand can you just show us a chart or something.

    Please cut it out with the screen take over ads as well. Nobody likes them.

  58. Regarding the FAQ on how to look up the calibration number on “https://keto-mojo.com/help-docs/glucose-ketone-control-ranges/” . After entering a valid lot number on the testing strip package as instructed I received the “Enter a Valid Lot Number” error message. My lot numbers are: glucose strip – U210286 and ketone strip – U210293.

  59. The lot numbers I am entering are not valid:
    Ketone: U210140 and Glucose: U210137

  60. I entered the lot numbers for both multiple times and screen kept listing list a valid number. My Glucose and Keytone lots are U210211 and U210212

  61. Hi – I entered my glucose and ketone lot numbers but nothing happened. It didn’t give me the range for the solutions.

  62. When I enter my glucose strip lot number above, I get a message saying to enter a valid lot number.

  63. Typed in both lot numbers for ketone and glucose. Both are “not valid.” These came with my new meter. Also, numerous ketone strips are missing. The package was sealed with no strip within, 5 missing in total.

  64. I put in the lot number for both the glucose strip and the ketone strip and they both said to enter in a valid Lot number, which I did. So, it was no help!

  65. There was no answer because it says my lot #’s are invalid. I double checked and they were typed in correctly.

  66. I’m entering the lot number from the back of the glucose test strip package and it just keeps saying “enter a valid lot number.” I’ve double checked it and I’m entering the correct lot number. I just want to know the control test range.

  67. I entered the lot number from the back of the ketone test strip wrapper. I get “enter a valid lot number” message.

  68. Says my lot number not valid. But, that’s what is printed on wrapper. Hmmmm.

  69. Hello,
    The following Lot number do not appear within the lookup to determine the test solutions range:
    Ketone: Lot#U210337
    Glucouse: Lot#U210338

    Could you provide me with the ranges for both? Thank you!

  70. Lot number didn’t work U210043 and my control solution doesn’t have a range

  71. It is saying my lot# is not vail that came with the box. Glucose lot # is U210137 and Ketone lot # is U210138

  72. I am trying to figure out the control range. I went to the website and it is pretty straight forward however when I put in lot code for both glucose and ketones it tells me invalided lot number. Lots numbers are below.

    Glucose Lot: U210215
    Ketones Lot: U210177

  73. Hi there,

    My keto mojo machine is giving me varied blood sugar results with each strip. It looks to be inaccurate. Which makes me wonder if my ketone strips are accurate too?

    I was trying to look up my ketone and glucose testing solution ranges to see if my meter is working correctly, but they said I have an invalid lot #?

    I’m very confused and dissatisfied because this machine wasn’t cheap!

    Please let me know what I can do.

    Thank you in advance,

    Kelly

  74. Ciao,
    I could not find the range for the test strips. The lot number is U210176 for glucose and U210178 for ketone. Thanks!

  75. My mojo is not working properly …says my control number is in valid …I just bought my mojo + a few months ago from you

    Aiuto

  76. Ciao
    I have the older meter and would like to just purchase strips and the new meter. I don’t want to pay for things I don’t need. Can I purchase strips and meter? Or do you have old strips left? Thank you

  77. I entered my lot number exactly as it shows on the strip – U210038 – and it keeps saying invalid lot number.

  78. I can’t find the control range for L2 vial by using the lot number on my new ketone strips. They say U210004 but your search says invalid. I threw away the box so I don’t have the grey sticker.

  79. My blood sugars seem crazy out of control and I’m trying to use the control solutions but can’t find the sheet of ranges. Tried to use the page and it Jerrod telling me that my lot numbers on the strips aren’t valid

  80. My lot numbers are not “valid” for either of these entries. I have triple-checked by typing.
    Glucose: U210284
    Ketone: U210287

  81. I entered the lot # and it indicates invalid. Glucose U210086 Keto U210089

  82. Ciao,
    I need the control values for glucose strips from the lot # U210176. The form above is saying it is not valid.

  83. LOT NUMBER COMES BACK INVALID HOW DO I KNOW MY TEST SOLUTION RANGE?

  84. I have glu strip lot number U210010 exo 3/26/23. I’m trying to confirm control range. System says number not valid.

  85. I put the lot number in, and it kicked it out saying enter valid lot number.

  86. Error “Enter a valid lot number”. Glucose lot number on my strip is U210130

    Same error for ketone strips. Ketone lot number on my strip is U210129

  87. SAYS MY LOT NUMBER IS NOT VALID… BUT IT MOST CERTAINLY IS WHAT IS ON THE STRIPS…
    GLUCOSE U210043 KETONE U210046

  88. A typed in the ketone lot number: 210082, but it is not accepted and I cant see the control solution range.

  89. It does not accept the lot number.

    Lot number for glucose is 210079

    The reading I got for glucose test is 5.7.

    The lot numbers I have for both glucose and ketone strips are not long enough for your form.

  90. Error message says “Enter a valid Lot Number.” I am entering the correct number

  91. The above “control solution ranges” Lot number check is not acknowledging that the four separate lot numbers received in the latest bundle are even valid!

  92. I have entered my lot number on the glucose strips and it keeps saying enter a valid number….I have!!!

  93. Both Lot numbers have been typed in correctly and both say the lot number is invalid. How can I get my ranges when this is saying the lot numbers are invalid when they’re not??

  94. It is telling me to enter a valid lot number when I’m precisely entered the correct lot number

  95. I put the correct lot numbers below. Response was they were invalid.
    Glucose lot:U210137
    Ketones lot:U210138
    Can you help me with this?
    Grazie

  96. My glucose strips indicate a lot number of U210033, and I get invalid lot number message when I enter.

  97. update your lot number faster–we’ve had this for months and your site says invalid lot. we triple checked we’re entering it correctly

  98. I tested my blood glucose this morning and got a reading of 173 and ketones of 2.3. I immediately retested and got a reading of 86 and a reading of hi for ketones. I then ran controls and got 106 for the glucose strip and 2.4 for ketone strip. Ketone strip lot #u210134 and glucose lot# u210132

  99. Last month I bought a new Keto-Mojo GK+ meter kit to replace my old meter.
    I am trying to learn more about the process, but when I enter the lot numbers on the strip packages I just get the message “Enter a valid lot number”, what’s wrong? The glucose lot number is U210176 exp: 2023-06-08,
    the ketone lot number is U210177 exp:2023-06-08.

  100. In this wide control test sample range how can you accurately convert to blood sample test.

  101. My ketone and glucose strips lot number is not showing up says invalid. Exp date is 4/16/23

  102. I am incredibly angry with the fact that you FORCED me to buy a new meter and it doesn’t sync correctly. I followed your directions exactly. But my lot number shows up as not being valid. The strips came with the meter for goodness sake.

    I want this fixed and I really hope you can help me.

  103. I recently bought glucose strips. The lot number comes up invalid.
    U210043

  104. im typing in the lot number, U210176, and it just says error. also i srill have all the papers that were in the box and cant find these ranges

  105. I am trying to find the test control level 2 numbers for my G+ device. The two test strip lot numbers I have are Glucose U210176 and Ketone U210177. Please tell me the range my meter should return for these test solutions level 2 Glucose UAN20085 and level 2 Ketone UEN20072.

  106. the lot numbers on the strips give me the message “Enter a valid lot number” and the number entered from the back of the strip case is correct.

  107. When I enter the the lot number out of the package in the above area it says non valid lot number

  108. Can’t figure out control test range for strips that came with kit. Ketone strip lot number U210177. When i enter says enter value lot number

  109. I am receiving an “invalid lot number” message when trying to find control range. The lot number is U210045

  110. Why is the range so big? If the range of error for my actual blood sugar is that wide, then that is concerning.

  111. I have inputted 2 boxes lotnumbersand thy have all come up as invalid.

  112. Questo non risponde a nessuna domanda per me. Inoltre, quando inserisco i numeri di lotto, non funzionano. Sono sicuro che non sono validi ma il sito continua a dirmi di inserire un numero di lotto valido. Inserisco U210012 per la mia striscia di glucosio e U200222 la mia striscia di chetoni e niente. Anche la mia vera domanda riguardava quali letture avrei dovuto ottenere con la soluzione di controllo con i numeri di lotto UAN20050 per la soluzione di glucosio e UEN20036 per la soluzione di chetone. Si prega di aiutare e correggere il sito per funzionare correttamente.

  113. Il mio misuratore di chetoni sta leggendo al di sotto dell'intervallo della soluzione di controllo e questo non mi dà alcuna informazione su cosa significa o su come calibrare o fare qualcosa per assicurarmi che la mia unità stia leggendo accuratamente

    1.7 stava leggendo
    1.8-2.8 è l'intervallo stampato per il controllo

  114. Sul browser Chrome non è possibile vedere quale dovrebbe essere la lettura del contorno. La striscia di chetoni viene visualizzata come numero di lotto non valido

  115. Questo non accetterà i miei numeri di lotto. Continua a chiedermi di inserire un numero di lotto valido

  116. utilizzato molte strisce per testare le soluzioni di controllo.

    Ecco cosa hanno mostrato le soluzioni di controllo:
    Chetoni .2
    glucosio basso

    Ho provato molte strisce senza alcun risultato.

    FWIW, sto facendo un digiuno di 4 giorni. Per questo metro ecco i risultati
    Chetoni 7.1
    Glucosio 45

    Aiuto! ho un contatore difettoso?

    Conte Hersh
    Houston TX
    281-460-5968

  117. Sto cercando di ottenere quale dovrebbe essere la gamma per le mie soluzioni di controllo fornite con il mio kit. Se inserisco il numero di lotto risulta non trovato.

  118. Quando inserisco il numero della striscia, dice che non è valido, U210010.

  119. il numero di lotto delle mie strisce chetoniche stampato sul retro della confezione delle strisce è U200181, tuttavia il sistema non lo riconosce e in rosso indica "inserire un numero di lotto valido". ho quadruplicato il controllo che sto inserendo correttamente ciò che è stampato sul pacchetto di strisce chetoniche corretto, ma il tuo sistema non lo riconosce. la lettura del mio test dei chetoni era 2,5, il mio misuratore funziona? il mio numero di lotto del glucosio è U200169 e la lettura del test era 113. Per favore fatemi sapere cosa c'è che non va e se il mio misuratore funziona correttamente.

  120. Non riesco a trovare i numeri della soluzione di controllo per calibrare il mio keto-mojo. Quando inserisco i numeri di lotto delle mie strisce di glucosio e chetoni, il tuo sito dice che sono numeri di lotto non validi

  121. Sto digitando il mio numero di lotto perché ho buttato via la scatola e sto cercando di utilizzare la soluzione di controllo e mi dice inserire un numero di lotto valido. U200180 strisce chetoniche. Le mie letture vanno da 2,4 a 0,4 a 0,2 in 5 secondi. Sto solo sprecando tutte le strisce che ho comprato a questo punto e ho appena ricevuto il monitor GK+ non molto tempo fa perché in pratica ci hai costretto a farlo. È spazzatura rispetto al monitor originale che ho comprato da te.

  122. I range di controllo sono ampi. Per me, si traduce in misurazioni imprecise di Keto-Mojo. Un misuratore accurato non dovrebbe dimostrare una lettura meno variabile utilizzando soluzioni di controllo standardizzate? Grazie.

  123. le strisce reattive fornite con il mio keto mojo non hanno un intervallo da nessuna parte sulla confezione o sulle strisce, quindi non ho idea se i risultati del test della soluzione di controllo siano nell'intervallo.

  124. Il numero di lotto per le strisce reattive per i chetoni è indicato come non valido (U200180).

  125. il numero di lotto dice non valido. è stato digitato correttamente. U200179 strisce chetoniche

  126. Su iPhone / chetoni i risultati per il livello 2 e il livello 3 sono tagliati e non completamente visibili
    Ho ricevuto le mie strisce di glucosio durante un viaggio in Europa e non forniscono un risultato del test.

  127. 1. Non so cosa significano i numeri.
    2. Le parti inferiori dei numeri sono state tagliate.

  128. Non ha riconosciuto il numero, inserito correttamente dalla striscia reattiva.

  129. Non è chiaro. Il mio misuratore riconosce che ho usato la mia soluzione di controllo e la lettura mostra 105 ma l'intervallo sulla scatola è troppo grande da 96 a 136. Questo non mi dice se il mio contatore sta leggendo accuratamente. Lo stavo controllando oggi perché la mia glicemia è anormalmente bassa negli anni '50 e i miei chetoni sono anormalmente alti a 1,9

  130. Ho inserito il numero di lotto di Ketone ma questo strumento dice che non è valido. L'ho controllato tre volte ed è stato inserito correttamente

WRITE A REVIEW

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

Questo sito è protetto da reCAPTCHA, ed è soggetto alla Privacy Policy e ai Termini di utilizzo di Google.

cta-booklet

Non nella nostra mailing list?
Sign up and get 5 Fabulous French Recipes! Oui s'il vous plaît!

Noi di Keto-Mojo crediamo nella condivisione, condividendo importanti notizie, scienza e studi sulla comunità di cheto, fantastiche ricette di cheto, prodotti che amiamo e profili delle persone che ci ispirano.

Join our community now and fall in love with 5 new French recipes!

Show Buttons
Hide Buttons
X